EUS0153210_YFact_Standard_E - 第170页

3-50 3 Board Editor n Examples of changing Offset value The following figure is a graphic view that makes the offset value (5mm, 5mm). The larger part is located at the center of board and parts are located at the origin…

100%1 / 238
3-49
3
Board Editor
n
Board Graphic View Offset dialog
You can change Offset Value from Board Graphic View Offset dialog
Board Graphic View Offset dialog
64374-S0-00
Whenthedialogisclosedbypushingthe[OK]buttonafterchanging,theoffsetvalueafteritchangingis
reflected in a Graphic View.
There are two kinds of offset values (based the Edge Clamp and the Locate Pin) displayed here.
It is different which to be used according to each machine uses the method of fixing which substrate.
Board Fix Device
64375-S0-00
However,when“LocatePin”settingonthe“MachineProperty”is“None”(itis“MachineInformation”-
“InstallationSetting”),theOffsetValue-“EdgeClamp”isusedalways.
“Machine Information” - “Locate Pin” Exist / None
64376-S0-00
3-50
3
Board Editor
n
Examples of changing Offset value
The following figure is a graphic view that makes the offset value (5mm, 5mm).
The larger part is located at the center of board and parts are located at the origin position.
Offset (5mm, 5mm)
64377-S0-10
It is shown to be arranged at the position of (5mm, 5mm) while selecting parts at the starting point position
when seen from the substrate coordinates.
The following figure is a graphic view that makes the offset value (0mm, 0mm).
The coordinates are different though parts are arranged at the center of the substrate similarly.
Offset (0mm, 0mm)
64378-S0-10
Moreover, parts at the starting point position are arranged in (0,0) on the substrate.
3-51
3
Board Editor
4. Multi Lane Support
Additional features supporting the dual lane machine are listed below.
4.1 Board data select dialog is extended
"Lane 1 Board Name", "Lane 1 Board Comment", "Lane 2 Board Name", "Lane 2 Board Comment" are added.
On the line without dual lane machine, the former dialog is displayed.
Board data select dialog
64380-S0-00
4.2 The tree view is extended
Laneinformationisdisplayedinthetreeview.WhenreadingYGX(Combined)boarddata,[Lane1Board],
[Lane2Board]aredisplayedbelowtheboarddataandgraphicviewicon,andwhenselected,theinformation
for each lane is displayed in the main view.
Tree view
64381-S0-00