EUS0153210_YFact_Standard_E - 第208页
4-33 4 Feeder Viewer When you have moved the feeder , the parts setup information of that feeder is added to the parts setup information list of the machine where the feeder was moved. Display after moving the feeder The…
4-32
4
Feeder Viewer
3.6.2 Moving a feeder between machines
You can also move a feeder between machines registered in the same line.
Whenafeederismovedtoanothermachine,thepartssetupinformationofthatfeederisalsomoved.
1
Select the feeder you want to move.
On the feeder plate layout, click the feeder you want to move.
The selected feeder is then enclosed by a broken line.
When the parts setup information list is displayed in the upper grid, the selected feeder row is
highlighted.
Reference
When the parts setup information list is displayed in the upper grid, you can also select a feeder by clicking on its row.
Selecting the feeder you want to
64450-S0-00
2
Move the feeder.
Drag and drop the feeder to the desired position on the feeder plate of another machine.
Moving the feeder by drag and drop
Drag and drop with mouse.
64451-S0-00
4-33
4
Feeder Viewer
When you have moved the feeder, the parts setup information of that feeder is added to the parts
setup information list of the machine where the feeder was moved.
Display after moving the feeder
The Set No.
changes to the
new number.
New position to which the feeder was moved.
64452-S0-00
3
Save the data.
Save the edited board data as described in the preceding section "3.5 Saving the board data."
4-34
4
Feeder Viewer
3.7 Dividing the parts
Parts loaded on one feeder can be divided so that they are supplied from two or more feeders. This will shorten
the time required to mount parts on one board when the same type of parts are used in large quantities.
1
Select the parts you want to divide.
On the feeder plate layout, double-click the feeder for the parts you want to divide.
The feeder for the selected parts is enclosed by a dotted line.
When the parts setup information list is displayed in the upper grid, the selected parts row is highlighted.
Reference
When the parts setup information list is displayed in the upper grid, you can also select a part by clicking on its row.
2
Execute the “Parts divide” command.
1. Select "Parts divide" from the context menu (right-click menu) that appears when the right mouse
button is clicked on the feeder for the selected parts.
Selecting the "Parts divide" command
64453-S0-00
2. The "Multiply Parts" dialog box appears.
3. In the "Multiply No." box, set the number of feeders among which you want to divide the parts.
"Multiply Parts" dialog box
Set the number by which you want to divide the parts.
64454-S0-00