EUS0153210_YFact_Standard_E - 第54页

2-20 2 Board Explorer 3 Change the language. Select the desired language from the La nguage drop-down list. 4 Click the [OK] button. The change you have made is enabled after r estarting the Board Explorer . "Option…

100%1 / 238
2-19
2
Board Explorer
4. Factory Tools option settings
Use the Factory Tools option settings when selecting the language to display menus and messages or
specifying other optional functions.
The Factory Tools option settings can be changed from the Board Explorer, Board Editor and the Factory
Tools Start menu. This section explains the option setting from the Board Explorer.
4.1 Option setting
In the Board Explorer window, selecting “Factory Tools Option” from the Maintenance menu displays the
“Option Setting” dialog box. Click the tab for the option you want to check and make the necessary changes.
n
NOTE
To enable the changes you have made here, click the [OK] button to close the "Option Setting" dialog box and then
restart the Board Explorer.
4.1.1 Changing the language
The Factory Tools allows you to switch the display language between Japanese and English. To change the
display language, follow these steps.
1
Start the Board Explorer.
2
Select “Factory Tools Option” from the Maintenance menu.
The "Option Setting" dialog box appears.
Maintenance menu
Selecting "Factory Tools Option"
64231-S0-00
2-20
2
Board Explorer
3
Change the language.
Select the desired language from the Language drop-down list.
4
Click the [OK] button.
The change you have made is enabled after restarting the Board Explorer.
"Option Setting" dialog box
[Display] tab for changing the language
Select the language and click [OK].
64232-S0-00
4.1.2 [Database] tab
Clickingthe[Database]tabopensthefollowingscreenforthedatabase option setting.
Factory Tools option setting
[Database] tab
2
1
4
3
11
7
5
6
10
8
9
64233-S0-20
2-21
2
Board Explorer
1. Use Database
Selectwhethertousethedatabaseandtheconditionfromthe“UseDatabase”drop-downlist.
Item Description
NotUse Select when not using the database.
FDX/MDX Select when using fdx/mdx database.
FDX/MDX (with saving FD/MS) Select when using both fdx/mdx and fd/md database.
FD/MD Select when using fd/md database.
2. Database folder
Shows the path to the registered database.
Youcanalsousethe[Browse]buttontocheckthelocationwherethedatabaseisstored.
3. Parts
Backs up and restores Parts database.
4. Mark
Backs up and restores Mark database.
5. Perform All Set
“All Set” is conducted when loading circuit board with editor or when optimization is performed.
6. Database matching condition
Selects whether a name or key is selected as a key term to match parts and database.
7. Synchronous operation setting
Select the use of database synchronization. “Database use” is only valid for “FDX/MDX (also saved on FD/MD)”.
8. Database by models
SelectifDatabasebymodelsistobeused/nottobeused.Formoreinformation,pleaserefertoP-ToolUser'sManual
"Chapter 6, Database".
9. Database by types
SelectifDatabasebytypesistobeused/nottobeused.Formoreinformation,pleaserefertoP-ToolUser'sManual
"Chapter 6, Database".
10. Database duplicate check
SelectifDatabaseduplicatecheckistobeused/nottobeused.Formoreinformation,pleaserefertoP-ToolUser's
Manual "Chapter 6, Database".
11. Additional parameter database management
Add parameters to be included in the management objects for database setting, setting from board. For more information,
pleaserefertoP-ToolUser'sManual"Chapter6,Database".
4.1.3 [Option] tab
Clicking the “Option” tab in the “Option Settings” window displays the option settings. Hardware key options
and available tools are listed and can be confirmed.
4.1.4 [Special Setting] tab
Clickingthe[SpecialSetting]tabshowsalistofspecialfunctionsavailablefortheFactoryTools.