EUS0153210_YFact_Standard_E - 第6页

5.3 “Production Plan”-“Plan Board Or der Change” dialog is extended 4-5 1 5.4 “Optimizer”-“Optimizer Result” is extended 4-5 1 Chapter 5 Rank T able Editor 1. Overview 5- 1 1.1 Contents of a BIN T able 5- 2 1.2 Specifyin…

100%1 / 238
Chapter 4 Feeder Viewer
1. About the Feeder Viewer 4-1
1.1 Starting the Feeder Viewer 4-1
1.2 Quitting the Feeder Viewer 4-3
2. Basic operation 4-4
2.1 Plan information screen 4-4
2.2 Creating new plan information 4-18
2.3 Opening a plan file 4-21
3.
Editing the data on the plan information screen
4-22
3.1 Switching the production lines 4-22
3.2 Adding or deleting board data 4-23
3.2.1 Adding board data 4-23
3.2.2 Deleting board data 4-24
3.3 Changing the order of board data 4-25
3.4 Editing the board data 4-27
3.5 Saving the board data 4-28
3.6 Changing the feeder or tray position 4-30
3.6.1 Moving a feeder within the same machine 4-30
3.6.2 Moving a feeder between machines 4-32
3.7 Dividing the parts 4-34
3.8 Combining the parts 4-36
4. Feeder Viewer Setting 4-38
4.1 Feeder Viewer Setting 4-38
4.1.1 Start of setting screen (menu selection) 4-38
4.1.2 Content of setting 4-39
4.2 Dump Station Arrangement Setting 4-40
4.2.1 Detailed explanation of operation 4-40
4.2.2 Settings 4-42
4.2.3 Error Message 4-44
4.2.4 Limitations 4-44
4.3 For 0 mount point parts 4-45
4.3.1 Setting 4-45
4.3.2 Display 4-46
4.3.3 Move parts 4-47
4.3.4 Multiply parts (Only at the feeder layout display) 4-48
4.3.5 Combine parts (Only at the feeder layout display) 4-48
4.3.6 Interference Check (Only at the feeder layout display) 4-49
4.3.7 Setup Assignment 4-49
5. Multi Lane Support 4-50
5.1 Production board list is extended 4-50
5.2 [Multiply Parts] and [Combine Parts] dialog are extended 4-50
5.3
“Production Plan”-“Plan Board Order Change” dialog is extended
4-51
5.4 “Optimizer”-“Optimizer Result” is extended 4-51
Chapter 5 Rank Table Editor
1. Overview 5-1
1.1 Contents of a BIN Table 5-2
1.2 Specifying the Part Characteristics (BIN) 5-3
2. Usage 5-7
2.1 Create New 5-7
2.2 Add Table 5-7
2.3 Production Type/Board Name Edit 5-7
2.4 Pattern Name Group Edit 5-8
2.5 Combination Edit 5-9
Index
The instruction manual of this machine is written for those who operate
this machine.
Please read this manual carefully for correct operations and pay
special attention to safety precautions.
After reading through this manual, please use this manual as an
occasional reference and keep it within reach.
Microsoft™ and Windows are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Before using Factory Tools
Contents
1. About this manual i
2. Factory Tools application configuration i
3. Checking the system configuration ii
3.1 Necessary hardware ii
3.2 Applicable models iv
3.3 Board data format v
3.4 Other cautions vi
3.5 Package contents vi