00194086-01 - 第149页
User Manual SIPLAC E CS 6 Component handling Software Vers ion SR.408.xx 03/2006 U S Edition 6. 4 Used tape cutter 149 6.4 Used tape cutter The pla cement s ystem ha s a used tape cutter at e ach of the two co mponent tr…
6 Component handling User Manual SIPLACE CS
6.3 Component trolley Software Version SR.408.xx03/2006 US Edition
148
6.3.4 Support for the middle tape reel for 3x8 mm feeder modules
Type 3x8 mm S feeders transport components to the pick-up position on three tracks. The tape
reels of the two outer tracks are positioned between the separating plates in the tape container.
The middle tape reel is arranged over the tape reels for the two outer tracks.
For the middle tape reels you will therefore also need:
– 1 adapter plate for holding the tape reel holder (item 1) and
– 1 tape reel holder (item 2) for every two feeders
The adapter plate is fixed to the component trolley with four fillister head screws, and the tape
reel holders are inserted into the square openings in the adapter plate.
Fig. 6.3 - 5 Support for the middle tape reel for 3x8 mm feeder modules
(1) Adapter plate
(2) Tape reel holder
User Manual SIPLACE CS 6 Component handling
Software Version SR.408.xx 03/2006 US Edition 6.4 Used tape cutter
149
6.4 Used tape cutter
The placement system has a used tape cutter at each of the two component trolley locations. It is
used to cut off the waste tape. The cut pieces of tape drop into the waste tape container in the
component trolley.
Æ Empty the waste tape container every day (item 7 in Fig. 6.3 - 1, page 144).
6
Fig. 6.4 - 1 Used tape cutter
(1) Stationary cutting blade
(2) Retainer
(3) Moving cutting blade
(4) Electronic control unit
(5) Short stroke cylinder
6 Component handling User Manual SIPLACE CS
6.4 Used tape cutter Software Version SR.408.xx03/2006 US Edition
150