00194086-01 - 第16页
1 Introduction User Manual S IPLACE CS 1.8 Abbreviations Software Version SR. 408.xx 03/2006 US Edition 16
User Manual SIPLACE CS 1 Introduction
Software Version SR.408.xx 03/2006 US Edition 1.8 Abbreviations
15
1.8 Abbreviations
1
1
1
C&P 1 Collect&Place 1
C&P6 1 Collect&Place head with 6 segments 1
CO 1 Component 1
DCA 1 Direct Chip Attach 1
EGB 1 Electrostatically-sensitive group of components 1
ESD 1 Electrostatic sensitive device 1
FC 1 Flip chip 1
GND 1 Ground 1
IC 1 Integrated circuit 1
MC 1 Machine controller 1
P&P 1 Pick&Place 1
PCB 1 Printed circuit board 1
SC 1 Single conveyor 1
SC 1 Station computer 1
SMD 1 Surface mounted device 1
VS 1 Vision system 1
WPC 1 Waffle-pack changer 1
WT 1 Waffle-pack tray 1
WTC 1 Waffle-pack tray carrier 1
1 Introduction User Manual SIPLACE CS
1.8 Abbreviations Software Version SR.408.xx 03/2006 US Edition
16
User Manual SIPLACE CS 2 Operational safety
Software Version SR.408.xx 03/2006 US Edition 2.1 Safety instructions
17
2 Operational safety
2.1 Safety instructions
2.1.1 Conventions for the use of hazard symbols
This User Manual contains notes that must be observed to guarantee your personal safety and to
avoid damage to equipment. These notes are highlighted by warning triangles and are indicated
as follows according to the level of risk:
2
DANGER or
as used in this User Manual means that death, severe injury or considerable damage to equip-
ment
will
occur if the danger instructions are not followed.
2
WARNING or
as used in this User Manual means that death, severe injury or considerable damage to equip-
ment
may
occur if the warning instructions are not followed.
2
CAUTION or
as used in this User Manual means that slight injury or damage to equipment may occur if the cau-
tion instructions are not followed.
PLEASE NOTE
as used in this User Manual provides information on the product or indicates a part of the User
Manual that requires particular attention.
2.1.2 Qualified personnel
Qualified or adequately trained personnel means that these people are familiar with the setting up,
operation and preventive maintenance of automatic placement systems and add-on devices and
are suitably qualified, e.g.
– have been trained, instructed or authorized to switch on and off, isolate, earth and identify elec-
trical circuits and system components in accordance with normal safety standards.
– have been trained or instructed in the upkeep and use of appropriate safety equipment in ac-
cordance with normal safety standards.
– have received first aid training.