00194086-01 - 第22页

2 Operational safety User Manual SIPLACE CS 2.2 Warning labels Software Version SR.408.xx03/2006 US Edition 22 2.2 W arning labels 2.2.1 W arning labels W20 1, W203, W204, and W206 on the machine The warnin g label s are…

100%1 / 160
User Manual SIPLACE CS 2 Operational safety
Software Version SR.408.xx 03/2006 US Edition 2.1 Safety instructions
21
Æ Only use Siemens A&D original spare parts and authorized accessories. The use of other parts
will affect safety and will invalidate the liability for any consequential damage.
Æ Do not make modifications to the safety equipment. In particular, NEVER bypass circuit-break-
ers or remove safety devices.
2.1.6 Safety instructions for laser units
Permission to operate components that are classified as lasers is withdrawn if
– mechanical damage to the unit is observed, or
– any work is done on the mechanical or electrical parts of the unit.
Even damaged or missing screw locking paint on laser components (e.g. cover plates, fas-
teners, adjusting potentiometer) counts as work.
– Only SIEMENS A&D service engineers, or the machine owner's service engineers who
have been trained by SIEMENS A&D are allowed to replace laser components.
– Repairs to laser units are carried out at the SIEMENS A&D factory exclusively.
2.1.7 Important notes on environmentally-friendly disposal of materials and
components
SIPLACE systems are manufactured using only materials and parts that can be easily separated
and disposed of in an environmentally-friendly way. Hazardous materials are not necessary for the
installation, dismantling or operation of the system.
PLEASE NOTE 2
The owner of the system has sole responsibility for the proper environmentally-friendly disposal
of machines, working materials, consumables and wear parts.
Æ Please observe your national statutory provisions for waste disposal and environmental pro-
tection.
2 Operational safety User Manual SIPLACE CS
2.2 Warning labels Software Version SR.408.xx03/2006 US Edition
22
2.2 Warning labels
2.2.1 Warning labels W201, W203, W204, and W206 on the machine
The warning labels are made from soft PVC film, and are abrasion-proof, light-fast and resistant
to water and weathering.
Their design meets the requirements of ISO 3864-2 and ANSI Z535.4.
2
Fig. 2.2 - 1 Warning labels on the machine - part 1
Item W203 item no. 03009342-01
Item W204 item no. 03009343-01
Item W206 item no. 03009345-01
Item W210 item no. 03009350-01
User Manual SIPLACE CS 2 Operational safety
Software Version SR.408.xx 03/2006 US Edition 2.2 Warning labels
23
WARNING 2
– Do not use abrasive cleaners or solvents for cleaning warning labels.
– Replace any damaged or illegible warning labels.
2
Fig. 2.2 - 2 Warning labels on the machine - part 2
Item W201 item no. 03009338-01
Item W203 item no. 03009342-01
Item W204 item no. 03009343-01
Item W206 item no. 03009345-01
Item W210 item no. 03009350-01
03009
3
4
3
0
1
0300934
301
0300934501
03
0
093
4501
0
3
0
0
934501
0300934301
0300934501