Nordson_EFD_Automated_Dispensing_Systems_Maintenance_Guide - 第39页
39 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide. Automated Dispensing Systems Maintenance & Parts Guide Replacement Parts (continu…
Automated Dispensing Systems Maintenance & Parts Guide
38 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
Replacement Parts
• Most replacement parts are grouped into hardware kits by robot model. Refer to “Hardware Kits” on page39.
• The printed circuit boards (PCBs) are applicable to all models and are available in a standalone kit. Refer to
“Printed Circuit Board (PCB) Kit” on page40.
• Other available kits are specific to each robot model. Refer to “Model‑Specific Kits” on page40.
Motor drive PCBs
Power supply
EMERGENCY STOP
button switch
PCB A
PCB B (the larger board under PCB A)
PURGE button switch
START button switch
Fuse, 20 mm, 4 A
Spare fuse holder
Assembly, spare fuse holder and
fuse
Microfuse, I/O, 125 mAFuse, 20 mm, 3 A
Shorted plug
Power entry
module
39www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
Automated Dispensing Systems Maintenance & Parts Guide
Replacement Parts (continued)
Hardware Kit Contents
Component Group
Included in the Hardware Kit for these Models
PROPlus / PRO
E2 / E2V
Only
E3–E6 / E3–E6V
(Not E2 / E2V)
R / RV
Mechanical
Hardware kit (screws for a pencil or CCD camera)
X X X
Belt kit
X X X X
Grease kit
X X X X
Motor, Z axis
X X X X
Motor, Y axis
X X X X
Motor, X axis
X X X X
Motor, R axis
X
Spring, standard
X X
Spring, 6 kg
X
Electrical Switches
START button switch
X X X X
EMERGENCY STOP button switch
X X X X
PURGE button switch
X X X X
Optical switch
X X X X
Electrical Control
Power supply, 24V, 320W
X X X X
Power entry module
X X X X
Motor drive PCBs
X X X X
Shorted plug
X X X X
Fuses
Microfuse, I/O, 125 mA
X X X X
Fuse, 20 mm, 1 A
X
Fuse, 20 mm, 3 A
X X X
Fuse, 20 mm, 4 A
X X X X
Fuse holder
X X X X
Model‑Specific
CCD camera cable
X
Replacement camera lens
X
Hardware Kits
Hardware kits vary depending on the robot model and include replacement parts that correspond to the procedures
in this manual.
Part # Model
7363278 PROPlus / PRO
Part # Model
7363275 R3 / R3V
7363276 R4 / R4V
7363277 R6 / R6V
Part # Model
7363279 E2 / E2V
7363280 E3 / E3V
7363281 E4 / E4V
7363282 E5 / E5V
7363283 E6 / E6V
Hardware Kit Part Numbers
Automated Dispensing Systems Maintenance & Parts Guide
40 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
Replacement Parts (continued)
Printed Circuit Board (PCB) Kit
This kit includes PCBs A and B and applies to all robot models. To replace the PCBs, contact Nordson EFD for
technical assistance.
Part # Description Item
7363284 Service kit, printed circuit boards (PCBs) A and B
Model‑Specific Kits
The following replacement parts are specific to each robot model. When replacing these components, contact
Nordson EFD for technical assistance as needed.
PROPlus / PRO Series
Part # Description Item
7362443
DispenseMotion
™
controller, PROPlus / PRO Series
7362438 Base bracket for valve mounting, PROPlus / PRO Series
7362424 CCD camera
7362439 Replacement bulb, CCD camera, white
7362440 Replacement bulb, CCD camera, red
7362441 Replacement bulb, CCD camera, blue
7362442 Light controller