KY8030 Programmers Manual - 第19页
Program mers Manual | 1 7 11) Select the right top side of PCB w ith Trace then right click. Select View Position and click Offset. 12) Click “Save as Board Size”. ※ Note : If the user know t he exact board size, the us …
16 | KY-8030 Series(KYOS-2007001_rev0)
3DIn‐lineSolderPasteInspectionSystems
9) Select "Setup ▶ Origin" from the menu bar.
Then the desired point in the PCB to set it as the coordinates origin.
※ Note: Instead of going through steps 8) ~ 9), you can also set the origin via “Origin Shift” as
follows:
a) Select “Setup ▶ Origin Shift” from the menu bar.
b) Enter relative coordinates (X, Y) in reference to the existing origin for the PCB and click the OK button. The
origin will be shifted by the coordinates (X, Y) just entered.
10) In order to set the board size, select the left bottom side of PCB with Trace then right
click. Select View Position and click Source.
①
②
③
④
Programmers Manual
| 17
11) Select the right top side of PCB with Trace then right click. Select View Position
and click Offset.
12) Click “Save as Board Size”.
※ Note : If the user know the exact board size, the user can put the board size directly as follows.
a) Select “Setup ▶ Board Size” from the menu bar.
b) Enter the width (X) and length (Y) of the board and click the OK button. The board size will be set
to the X and Y values just entered.
①
②
③
④
18 | KY-8030 Series(KYOS-2007001_rev0)
3DIn‐lineSolderPasteInspectionSystems
13) Select “File ▶ Save As" in order to save it as “*.gpd”.
14) Select "File ▶ Export" from the menu bar.