KY8030 Programmers Manual - 第57页
Program mers Manual | 5 5 Ú Resizing a PCB Ú Specifying the spacing of an array board (1) Select Source position (2) Offset calculating (1) Select Source position (2)Offset calculating
54 | KY-8030 Series(KYOS-2007001_rev0)
3DIn‐lineSolderPasteInspectionSystems
1.3.5. View
1) Position
Display the position of the selected flash, trace or pad as an offset distance from the
specified reference point.
You can specify PCB and array sizes directly.
The "Position" Dialog Box
Position (X)
The center for the selected point
in the X-axis
Position (Y)
The center for the selected point
in the Y-axis
Offset (dx)
The offset distance between the
selected point and the reference
point (source) in the X-axis
Offset (dy)
The offset distance between the
selected point and the reference
point (source) in the Y-axis
Source
Specify the current point as a
reference point.
Initial Value = (0,0)
Offset
Calculate and display offset (dx)
and offset (dy).
Save as Board
Size
Save offset (dx) and offset (dy)
values as a PCB size.
Save as Array
Size
Save offset (dx) and offset (dy)
values as the row and column
sizes for an array board.
Programmers Manual
| 55
Ú Resizing a PCB
Ú Specifying the spacing of an array board
(1) Select Source
position
(2) Offset calculating
(1) Select Source
position
(2)Offset calculating
56 | KY-8030 Series(KYOS-2007001_rev0)
3DIn‐lineSolderPasteInspectionSystems
2) Aperture
Open the "Aperture" dialog box to display aperture data.
The "Aperture" Dialog Box
Refer to the "Aperture" dialog box that appears when "File ▶ New" is chosen in the
menu bar. Note that the "Import" option is not available here.
3) Redraw
Redraw a main view
4) Inside Pad
Show or hide flashes and traces in a pad.
With this option, you can display pads more clearly.
<Show>
<Hide>
5) Query
Open the "Query" dialog box to select items that will be displayed in the main view.
The "Query" Dialog Box
Flash
Specify whether a flash will be displayed.
Trace
Specify whether a trace will be displayed.
Silk
Specify whether a silk will be displayed.
Pad
Specify whether a pad will be displayed.