KY8030 Programmers Manual - 第86页
84 | KY-8030 Series (KYOS-2007001_rev0) 3D In ‐ line Solder Paste Inspection Systems Get Block Size : Recalc ulate the block size w hen the block was not c orrect. No of Pad : Put the correct number of Pads f…
Programmers Manual
| 83
2) Choose a not-matched component or component to be modified under the
“Component ID”.
3) Draw a box for that component ID in PCB display.
4) Click the Modify button.
The “Set Component” window will appear. Click OK.
②
①
③
84 | KY-8030 Series(KYOS-2007001_rev0)
3DIn‐lineSolderPasteInspectionSystems
Get Block Size : Recalculate the block size when the block was not correct.
No of Pad : Put the correct number of Pads for the components.
5) Modify component data as desired and click the OK button.
Once the component ID is registered, the "No match" sign for the modified
component will disappear.
6) Click the
button under the “Search ID”. Assign a pin number to the
matched pin CAD and pad data and register it. Save the registered pin number in a
job file.
7) Click the CAD Refresh button or press the F5 key in the keyboard to display all
component and pin numbers.
8) Click the Save button to save job data in a job file.
Programmers Manual
| 85
2.3. Menu Options
2.3.1. File Menu
1) Load Pad File
Load a pad file created with the GerbPad program.
The “Load” Dialog Box
※ Note: Only the *.pad file can be loaded.
2) Load Job file
Load a job file (*.mdb).
The “Load” Dialog Box
※ Note: Only *.mdb files can be loaded.
带格式的:
项
目符
号
和
编号
带格式的:
项
目符
号
和
编号
带格式的:
项
目符
号
和
编号