SI-F130 Manual(EN)_jpg_ Rev1 - 第40页
PWB Camera Light Calibrat ion HLF-10301-01 PWB Camera Light Calibration SHEET 2/3 2 Select jig No. of light calibration jig from the list box. 3 Move the PWB camera to above the calibra- tion plate jig. 1. Click the XY b…
PWB Camera Light Calibration
HLF-10301-01
PWB Camera Light Calibration
SHEET
1/3
PWB Camera Light Calibration
[Necessary jigs]
• Calibration plate jig
• Jig positioning pin
• Light Calibration jig
[Procedure]
1 Display the PWB Camera Light screen.
1. Click the Light Calibration button on
the CALIBRATION screen.
Light Calibration screen is displayed.
2. Click the PWB Camera Light button
on the Light Calibration screen.
PWB Camera Light screen is displayed.
Jig positioning pin
Calibration plate jig
Light Calibration jig
PWB Camera Light Calibration
HLF-10301-01
PWB Camera Light Calibration
SHEET
2/3
2 Select jig No. of light calibration jig from the
list box.
3 Move the PWB camera to above the calibra-
tion plate jig.
1. Click the XY button on the PWB
Camera Light screen.
XY Axis screen is displayed.
2. Click the Jog Move button.
3. Jog move the PWB camera to above
the calibration plate jig.
4. Click the Return button to return to
the PWB Camera Light screen.
4 Click the Calibration Start button.
“Put jig under PWB camera” is displayed on the mes-
sage screen.
PWB Camera Light Calibration
HLF-10301-01
PWB Camera Light Calibration
SHEET
3/3
5 Place the light calibration jig on the calibra-
tion plate jig below the PWB camera.
Place the light calibration jig on the cali-
bration plate so that it appears on the
PCBOARD DISPLAY.
6 Press the START button on the operation
panel.
PWB camera light calibration is started.
After a few minutes, the calibration ends, and Lv1
values from level 1 to 8 and Gap value are displayed
on the PWB Camera Light screen.
7 Check the Gap values of Level 1 to 8.
It is normal if the Gap value is within 0 to 3.
8 Click the Save button.
The Gap values of Lvl 1 to 8 are saved and the PWB
Camera Light screen closes.
9 Remove the light calibration jig.
PWB Camera
PWB Camera
Li
g
ht
Light Calibration jig
(
Gloss face is downward
)