EUKYX-199-4110_G5S2_Instruction_Vol4_E - 第101页

EUKYX 1-52 199-4100 4.8 X/Y Beam Section Y -Axis Cable Fixing Places (2 locations) Every 6 Months Inspection Required T ime: 1 minute Check visually for any abnormality such as cracks. Y-Axis Linear Scale Every 6 Months …

100%1 / 363
EUKYX
1-51199-4100
4.8 X/Y Beam Section
X-Axis Cable Fixing Places (2 locations)
Every 6 Months Inspection
Required Time: 1 minute
Check visually for any abnormality such as
cracks.
X-Axis Cable Side Faces
Every 6 Months Cleaning and Lubrication
(BARRIERTA IEL/V)
Required Time: 3 minutes
(1)
Wipe off old grease with a rag for wiping oil.
(2) Apply new grease by hand or with a brush.
Take ample care not to leave
any waste threads after
cleaning.
Notice
X-Axis Linear Scale
Every 6 Months Cleaning
Required Time: 5 minutes
When it is very dirty, clean it using a rag soaked
in alcohol.
F4A35A
EUKYX
1-52199-4100
4.8 X/Y Beam Section
Y-Axis Cable Fixing Places (2 locations)
Every 6 Months Inspection
Required Time: 1 minute
Check visually for any abnormality such as
cracks.
Y-Axis Linear Scale
Every 6 Months Cleaning
Required Time: 5 minutes
When it is very dirty, clean it using a rag
soaked in alcohol.
Y-Axis Cable Side Faces
Every 6 Months Cleaning and Lubrication
(BARRIERTA IEL/V)
Required Time: 3 minutes
(1)
Wipe off old grease with a rag for wiping oil.
(2) Apply new grease by hand or with a brush.
Take ample care not to leave
any waste threads after
cleaning.
Notice
F4A39A
EUKYX
1-53199-4100
4.9 PCB Positioning Section
4.9 PCB Positioning Section
Ball Screws (2 locations)
Every 3 Months / Cleaning and Lubrication / Required Time: 10 minutes
(DAPHNE EPONEX GREASE No. 1)
Wipe off old grease with a rag and apply new one with a syringe.
Take ample care not to leave any waste
threads after cleaning.
Grease should be applied every 3 months after the initial month.
Use No. 19 (brown) nozzle.
Notice
Note
No.19
Upper Surface of Backup Table
Every Week / Cleaning / Required Time: 2 minutes
Remove foreign objects and unrequired components.
Suck dirt and dust with a vacuum cleaner.
F4A37A
Every 3 months / Cleaning and Lubrication /
Required Time: 20 minutes
(DAPHNE EPONEX GREASE No. 1)
Ball Screw and Ball Bush (4 locations each)
(1) Wipe off the old grease with a
rag for wiping oil.
(2) Apply grease to each shaft.
Take ample care not to leave
any waste threads after cleaning.
Notice
F4A37B