EUKYX-199-4110_G5S2_Instruction_Vol4_E - 第125页
EUKYX 1-76 199-4100 7. Consumables and Servicing Parts 7 . Co n s um abl es a nd Ser vic ing P arts 7 . 1 List of Consumables The fol lowi ng l ist is for the components that wou ld be worn withi n one year . When purch …
EUKYX
1-75199-4100
6. Using Procedure of Diffusion Plate Setup Jig
6. Using Procedure of Diffusion Plate Setup Jig
(1) Set the both inner and outer diffusion plates temporarily.
Outer Diffusion Plate
Inner Diffusion Plate
F4A65
(2) Attach the Jigs No. 1 and No. 2 onto the 3 locations shown in the figure below. Take care
not to damage the side view camera.
Jig 1 Jig 2
F4A66
(3) After fixing the diffusion plates using bolts, remove the jigs No. 1 and No. 2.
F4A67
Procedure
EUKYX
1-76199-4100
7. Consumables and Servicing Parts
7. Consumables and Servicing Parts
7.1 List of Consumables
The following list is for the components that would be worn within one year.
When purchasing any of these components, contact YAMAHA sales representatives.
Product Name Part No. Part Name Q'ty
Recommended
Replacement
Cycle
Recommended
number per year
Note (a)
Remarks
Nozzle (HV82C) KYA-M7782-00
HV82C---
ASSY_NOZZLE(HV82C) 30 One Year 30 Note (e)
Nozzle (HV13C) KYA-M7713-00
HV13C---
ASSY_NOZZLE(HV13C) 30 One Year 30 Note (e)
Nozzle (HV14C) KYA-M7714-A0
HV14C---
ASSY_NOZZLE(HV14C) 30 One Year 30 Note (e)
Nozzle (HV15C) KYA-M7715-A0
HV15C---
ASSY_NOZZLE(HV15C) 30 One Year 30 Note (e)
Nozzle (HV19C) KYA-M7719-A0
HV19C---
ASSY_NOZZLE(HV19C) 30 One Year 30 Note (e)
Nozzle (PA05C) KYB-M7730-A0
PA05C---
ASSY_NOZZLE(PA5C) 30 One Year 30 Note (e)
Nozzle (HG33C) KYA-M7703-A0
HG33C---
ASSY_NOZZLE(HG33C) 30 One Year 30 Note (e)
Nozzle (HG52C) KYA-M7705-00
HG52C---
ASSY_NOZZLE(HG52C) 30 One Year 30 Note (e)
Nozzle (HG24C) KYA-M7702-A0
HG24C---
ASSY_NOZZLE(HG24C) 30 One Year 30 Note (e)
Nozzle (HG82C) KYA-M7708- 00
HG82C---
ASSY_NOZZLE(HG82C) 30 One Year 30 Note (e)
Vacuum Filter KYB-M704D-00 AIR_CLEAN_EQPT 60 One week 240 Note (h)
Fluorine Sheet KYB-M3T15-00 GUIDE 2 One Year 2
Urethane Clamp
ASSY
KYB-M3T17-00
KYB-M3T16-00
ASSY_CLAMPER_Y
ASSY_CLAMPER_K
2
2
One Year 2
2
Seal ASSY
Flat Ring
Set Bolt
KYF-M865T-00
KYB-M3T1U-00
90990-01J118
ASSY_SEAL
SEAL
BOLT,HEX.SOCKET HEAD
2
2
12
One Year 2
2
12
Cutter
Unit
Sliding
Side
For the
Roller
DISK ASSY
Cutter Blade
Set Bolt
KYF-M865U-00
KYB-M3T1A-00
90990-06J004
ASSY_DISK
DISK
BOLT,HEX-SCT
4
4
12
One Year 4
4
12
Note (c)
Nozzle Filter KYA-M7702-10 AIR CLEAN EQPT
30
(15)
One Week
1000
(500)
Note
(d), (h), (i)
Vacuum Filter KYB-M3823-00 AIR_LINE_EQPT 3 Two Months 12 Note (d)
EUKYX
1-77199-4100
7.1 List of Consumables
(a) The recommended number of pieces is the value for reference only.
(b) Refer to “4. Inspection, Cleaning, and Lubrication Spots” in this chapter for component
replacement procedures.
(c) For the cutter blade replacement, consult with our service personnel because it is a
dangerous procedure. When the cutter blade is replaced, also replace the bolt.
(d) The figures in brackets are applied for the multi-functional head.
(e) It is recommended that the nozzle should be replaced every year or every 15 million
shots.
(f) The recommended replacement cycle does not show the product warranty period. The
recommended replacement cycle varies depending on the operation condition or
operation environment of the product.
(g) In the case of consumables, for the malfunction due to an error in the manufacturing
process, we will replace it by a new one for free of charge.
(h) The recommended replacement cycle for the nozzle filter varies depending on the nozzle
type, pattern program data or operation environment.
Note