EUKYX-199-4110_G5S2_Instruction_Vol4_E - 第151页

EUKYX 2-22 199-4100 3. Machine Information 3 . Machine Information 3. 1 “Machine Infor mation” Window In thi s wi ndow , variou s mac hi ne informa tion i tems are di spl ayed dur in g the mach ine operation . The machi …

100%1 / 363
EUKYX
2-21199-4100
2.2 Management Information list
Code Display Area A Display Area B
0d3c03 Pin Recog Light (head1) The comp size is over the pin recog light spec.
0d3c04 Pin Recog Light (head2) The comp size is over the pin recog light spec.
0d3d01 Comp Height Ovr (head1) This function cannot use. Beause of comp height over.
0d3d02 Comp Height Ovr (head2) This function cannot use. Beause of comp height over.
0d3e01
Full detection of trash
box for component
(Block1)
Trash box for component become full. Please clean trash box for
component.
0d3f01
Full detection of trash
box for component
(Block2)
Trash box for component become full. Please clean trash box for
component.
EUKYX
2-22199-4100
3. Machine Information
3. Machine Information
3.1 “Machine Information” Window
In this window, various machine information items are displayed during the machine operation.
The machine is not stopped with this indication.
[1]
[6]
[3]
[2]
[4] [5]
F4B3
[1] Machine Information Code
The machine information code is described in this text box.
[2] Display Area A
The outline of the machine information is displayed in this area.
[3] Display Area B
The details of the machine information are displayed in this area.
[4] [Clear Alm] Button
When this button is pressed, only the alarm buzzer is canceled.
[5] [OK] Button
When this button is pressed, the “Machine Information” window is closed.
[6] Error Display
When a full previous notice of the cover tape has occurred (Error code 0x802401), the feeder
number and the image are displayed. (Three subjects can be displayed in order from the left.)
Note
EUKYX
2-23199-4100
3.2 Machine Information list
Err Code
(HEX)
Display Area A Display Area B
800301
Warning: Decreasing of
Comp. Hdlg. Rate (For
Nozzle.)
Nozzle message rate :
800302
Warning: Decreasing of
Comp. Hdlg. Rate (For
Nozzle.)
The rate of nozzle adsorption fell. A cycle stop is carried out.
800401
Warning: Decreasing of
Comp. Hdlg. Rate (For
Fdr.)
Feeder message rate :
800402
Warning: Decreasing of
Comp. Hdlg. Rate (For
Fdr.)
The rate of nozzle adsorption fell. A cycle stop is carried out.
800505
Alternated Tray
Magazine Axis
Shortage of component
800601 Alternated Feeder Shortage of component
800602 Alternated Feeder Splice waiting
800603 Alternated Feeder Comp. Vertical (Sensor)
800604 Alternated Feeder Comp. Thickness (Sensor)
800605 Alternated Feeder Comp. Missing (Sensor)
800606 Alternated Feeder Comp. Recog. Error (recog.)
800607 Alternated Feeder Comp. Missing (Recog)
800608 Alternated Feeder Coplanarity Check Error
800609 Alternated Feeder
The feeder at the alternation destination is invalid. Please set it
effectively.
80060a Alternated Feeder Feeder unloading
80060b Alternated Feeder Returned to the priority feeder
80060c Alternated Feeder It was alternated.
80060d Alternated Feeder Feeder Alarm
80060e Alternated Feeder
Alarm Code:A0 - Internal Parameter Error (Breakdown of Control
P.C . B . )
80060f Alternated Feeder
Alarm Code:A1 - Over Current Error (Foreign substances in the tape
feeding drive section)
800610 Alternated Feeder
Alarm Code:A4 - Main Circuit Power Supply Error (Please check the
power supply voltage.) (G04)
80 0 611 Alternated Feeder Alarm Code:A5 - Fault Speed Error (Tape catching)
800612 Alternated Feeder
Alarm Code:A7 - Fault Load Error (Tape twisting, Catching foreign
substances)
800613 Alternated Feeder
Alarm Code:A8 - Encoder Error (Breaking wire, Breakdown of control
P.C.B. and Defective servo motor)
800614 Alternated Feeder Alarm Code:Ab - System Error
800615 Alternated Feeder Alarm Code:Ac - Reckless Run Detection Error
800616 Alternated Feeder Alarm Code:Ad - Excessive deviation in position
3.2 Machine Information list
The following is the machine information list by error code.