EUKYX-199-4110_G5S2_Instruction_Vol4_E - 第172页
EUKYX 3-8 199-4100 3.1 Safety Device Error ID Error Name, Description, Cause, and Remedy 4 0 0 81E Ser vo Al arm Initial Communication Error of Det ector( 2) Erro r of con nec ti on to Dete cto r . Plea se c hec k wir in…
EUKYX
3-7199-4100
3.1 Safety Device
Error ID Error Name, Description, Cause, and Remedy
4007B0 Operation Alarm
No Available Servo control
Please check whether there is connection to Servo Amplifier or not.
Please check System Error on Machine check screen about specification of Communication
Error.
4007B1 Operation Alarm
On Servo Alarm
Please operate after cancelling Servo alarm
4007B2 Operation Alarm
On Servo Off
Please operate after setting Servo [On]
4007B3 Operation Alarm
Command of Servo Off
There was Servo Off command during operation
400810 Servo Alarm
Insufficient voltage
The Power is dropped/disconnected for moment.
Please check wiring and power supply.
400812 Servo Alarm
Memory Error1(RAM)
Servo Amplifier is broken. Exchange it.
400813 Servo Alarm
Clock Error
Servo Amplifier or Position Port is broken. Exchange it
400815 Servo Alarm
Memory Error2(EEPROM)
EEPROM of Servo Amplifier is broken. Exchange it.
400816 Servo Alarm
Detector Error1
Error of connection to Detector. Please check wiring.
400817 Servo Alarm
Control Board Error
Exchange Servo Amplifier.
400819 Servo Alarm
Memory Error3(FlashROM)
Exchange Servo Amplifier.
40081A Servo Alarm
Motor Combination Error
Could not recognize connected Motor.
Please update the version of Servo Amplifier.
40081C Servo Alarm
Software Combination Error
Could not recognize connected Motor.
Please update the version of Servo Amplifier.
EUKYX
3-8199-4100
3.1 Safety Device
Error ID Error Name, Description, Cause, and Remedy
40081E Servo Alarm
Initial Communication Error of Detector(2)
Error of connection to Detector. Please check wiring.
40081F Servo Alarm
Initial Communication Error of Detector(3)
Error of connection to Detector. Please check wiring.
400820 Servo Alarm
Detector Error2
Error of connection to Detector. Please check wiring.
400821 Servo Alarm
Detector Communication Error(2)
Error of connection to Detector. Please check wiring.
400824 Servo Alarm
Main Circuit Error
Please exchange Servo Amplifier if no error after checking Motor Power line and Power
Supply input line.
400825 Servo Alarm
Abs. Position Disappear
Please set Linear Scale, and then perform XY-axis Origin Offset Teaching.
400827 Servo Alarm
Initial magnetic detect Error
Please open a safety cover and check the position of a beam.
1. Please detach a beam, when the beam 1 and the beam 2 are approaching.
2. Please check whether it is close to Limit Sensor or not. there is any pressure from
outside, or the ambience is vibrating.
400828 Servo Alarm
Linear Encoder Error2
Please check whether the temperature is high or not,
40082A Servo Alarm
Linear Encoder Error1
Please check whether there is no error in placement of Linear Encoder or not.
400830 Servo Alarm
Regenerative Error
Please drive with blocking tact. Or, exchange Servo amplifier
400831 Servo Alarm
Fault speed
Please confirm that Motor Power Line and Encoder Line have error or not.
400832 Servo Alarm
Over-current
Please confirm that Motor Power Line has error or not.
400833 Servo Alarm
Fault voltage
Please confirm that there is any error in Primary Power Supply Voltage or not.
400834 Servo Alarm
Receiving Signal1
Is there any cable twisted or bent? If it does, Check it.
EUKYX
3-9199-4100
3.1 Safety Device
Error ID Error Name, Description, Cause, and Remedy
400835 Servo Alarm
Command Frequency Error
Exchange Position Board
400836 Servo Alarm
Error received data.
Is there any cable twisted or bent? Check it.
400837 Servo Alarm
Parameter Error
Check Servo parameter. Exchange Servo Amplifier if no problem with Servo parameter.
400842 Servo Alarm
Linear Servo control error detected
Is there any error of setup Linear Encoder or wiring of Power Line? Check it.
400845 Servo Alarm
Main circuit elem overheat
Drive with blocking tact, or take the ambient temperature of the Amplifier down.
400846 Servo Alarm
Servo Motor overheat
Drive with blocking tact, or take the ambient temperature of the Motor down.
400847 Servo Alarm
Cooling Fan Error
Exchange cooling fan of Servo Amplifier
400850 Servo Alarm
Overload1
(1)Please perform Optimize.
(2)Please check whether there is no error in Sliding detect of a driving system or in motor
wiring or not.
400851 Servo Alarm
Overload2
Please check whether there is no error in Sliding detect of a driving system or in motor
wiring or not.
400852 Servo Alarm
Error in excess
Please check whether there is no error in Sliding detect of a driving system or in motor
wiring or not.
40088A Servo Alarm
USB communication time-out
-----
40088B Servo Alarm
USB Communication Error
-----
400891 Servo Alarm
Multi-axes Amplifier Temperature warning
Take the ambient temperature of the multi-axes amplifier down.
400892 Servo Alarm
Battery disconnection warning
-----