EUKYX-199-4110_G5S2_Instruction_Vol4_E - 第227页
EUKYX 3-62 199-4100 3.4 T ray Feeder (Block1) Error ID Error Name, Description, Cause, and Remedy 4 3870 2 Elev ator Recede position op erating error (Block1 ) Error of calculating Elevator mov ement position ----- 4 387…
EUKYX
3-61199-4100
3.4 Tray Feeder (Block1)
Error ID Error Name, Description, Cause, and Remedy
438601 Tray (Servo Error) (Block1)
Error of Power Driver, Over-current
Please confirm Motor wiring, Exchange Motor and Driver.
438602 Tray (Servo Error) (Block1)
Overload Alarm
Please confirm Motor wiring, Exchange Motor and Driver.
438603 Tray (Servo Error) (Block1)
Speed Alarm
You need to re-adjust Motor Gain.
438604 Tray (Servo Error) (Block1)
Multi-rotation Error
Please confirm Motor wiring, Exchange Motor and Driver.
438605 Tray (Servo Error) (Block1)
The value of Deviation Counter was over the set value
Please confirm the wiring of Origin Sensor, or exchange Driver.
438606 Tray (Servo Error) (Block1)
Power Drive detected temperature error.
Ambient Temperature is too high. Or, exchange driver.
438607 Tray (Servo Error) (Block1)
Sensor Error
Please confirm Motor Encoder wiring. Or, exchange motor
438608 Tray (Servo Error) (Block1)
High Drive voltage
Insufficient power capacity. Please exchange driver.
438609 Tray (Servo Error) (Block1)
Low drive voltage
Please confirm the operating Power wiring which is inserted to driver.
43860A Tray (Servo Error) (Block1)
Reading Error on permanent memory
Please exchange driver.
43860B Tray (Servo Error) (Block1)
Reading Error on permanent memory
Please exchange driver.
43860C Tray (Servo Error) (Block1)
CPU Error
Please exchange driver.
43860D Tray (Servo Error) (Block1)
Parameter Error
Please confirm the changed parameter.
43860E Tray (Servo Error) (Block1)
Alarm code readout failed
-----
438701 Elevator Recede position operating error (Block1)
Elevator pre-check error
-----
EUKYX
3-62199-4100
3.4 Tray Feeder (Block1)
Error ID Error Name, Description, Cause, and Remedy
438702 Elevator Recede position operating error (Block1)
Error of calculating Elevator movement position
-----
438703 Elevator Recede position operating error (Block1)
Elevator Start Time-out
-----
438704 Elevator Recede position operating error (Block1)
Elevator movement error
-----
438705 Elevator Recede position operating error (Block1)
Elevator movement Time-out
-----
438801 Elevator comp. position operating error (Block1)
Elevator pre-check error
-----
438802 Elevator comp. position operating error (Block1)
Error of calculating Elevator movement position
-----
438803 Elevator comp. position operating error (Block1)
Elevator Start Time-out
-----
438804 Elevator comp. position operating error (Block1)
Elevator movement error
-----
438805 Elevator comp. position operating error (Block1)
Elevator movement Time-out
Please confirm the operating Power wiring which is inserted to driver.
EUKYX
3-63199-4100
3.5 Tray Feeder (Block2)
3.5 Tray Feeder (Block2)
Error ID Error Name, Description, Cause, and Remedy
440201 Tray Motor Error (Block2)
Elevator abnormal stop
-----
440202 Tray Motor Error (Block2)
Elevator abnormal stop
-----
440203 Tray Motor Error (Block2)
Traverse abnormal stop
-----
440301 Tray Rack Shutter open/close error (Block2)
The Rack Shutter did not open in prescribed time.
-----
440302 Tray Rack Shutter open/close error (Block2)
The Rack Shutter did not close in prescribed time.
Please confirm whether the palette is not caught in the rack shutter.
440401 Tray Pallet Chuck open/close error (Block2)
The Pallet Chuck did not open in prescribed time.
-----
440402 Tray Pallet Chuck open/close error (Block2)
The Pallet Chuck did not close in prescribed time.
-----
441001 Tray Supply Operation Error (Block2)
-----
441002 Tray Supply Operation Error (Block2)
Tray steps No. disagreement of draw out(return operation)
-----
441003 Tray Supply Operation Error (Block2)
Tray steps No. disagreement of draw out(return operation)
-----
441004 Tray Supply Operation Error (Block2)
The operation mode is illegal. (system)
-----
441005 Tray Supply Operation Error (Block2)
TV axis's position is irregular
-----
441006 Tray Supply Operation Error (Block2)
Magazine classification disagreement
Please carry out the check of ten steps of magazines, and 15-step type.
441101 Tray Pallet Returning Error (Block2)
Elevator pre-check error
-----