EUKYX-199-4110_G5S2_Instruction_Vol4_E - 第249页
EUKYX 3-84 199-4100 3.8 Automatic Adjustment Error ID Error Name, Description, Cause, and Remed y 49 07 7E Noz zle se t up Erro r in rec og nizing N oz Sto cker M ark ----- 49 07 7F N ozzl e set up Erro r in rec og nizat…
EUKYX
3-83199-4100
3.8 Automatic Adjustment
Error ID Error Name, Description, Cause, and Remedy
49076F Nozzle set up
Error in turning on PCB recog camera Light
-----
490770 Nozzle set up
Error in turning on PCB recog camera Light (Teaching Noz Stocker)
-----
490771 Nozzle set up
Turning on PCB recog camera Light has not finished within predetermined time (Teaching
Noz Stocker)
-----
490772 Nozzle set up
Error in turning on PCB recog camera Light (Teaching Noz Stocker)
-----
490773 Nozzle set up
Error in turning on PCB recog camera Light (Noz Recog)
-----
490774 Nozzle set up
Turning on PCB recog camera Light has not finished within predetermined time (Noz Recog)
-----
490775 Nozzle set up
Error in turning on PCB recog camera Light (Noz Recog)
-----
490776 Nozzle set up
Error in turning off PCB recog camera Light
-----
490777 Nozzle set up
Turning off PCB recog camera Light has not finished within predetermined time
-----
490778 Nozzle set up
Error in turning off PCB recog camera Light
-----
490779 Nozzle set up
Error in capturing a image of PCB recog camera.
-----
49077A Nozzle set up
Capturing a image of PCB recog camera has not finished within predetermined time
-----
49077B Nozzle set up
Error in capturing a image of PCB recog camera.
-----
49077C Nozzle set up
Error in recognizing Noz Stocker Mark
-----
49077D Nozzle set up
Recognizing Noz Stocker Mark has not finished within predetermined time.
-----
EUKYX
3-84199-4100
3.8 Automatic Adjustment
Error ID Error Name, Description, Cause, and Remedy
49077E Nozzle set up
Error in recognizing Noz Stocker Mark
-----
49077F Nozzle set up
Error in recognization of the existence of Noz
-----
490780 Nozzle set up
Recognization of the existence of Noz has not finished within predetermined time
-----
490781 Nozzle set up
Error in recognizing the existence of Noz
-----
490782 Nozzle set up
Error in recognizing Noz ID
-----
490783 Nozzle set up
Recognizing Noz ID has not finished within predetermined time
-----
490784 Nozzle set up
Error in recognizing of Noz ID
-----
490785 Nozzle set up
Time-out of starting Side View Camera detect
-----
490786 Nozzle set up
Time-out of reading out the result of Side View Camera detect
-----
490787 Nozzle set up
Error in the result of Side View Camera detect
-----
490788 Nozzle set up
Time-out of starting Side View Camera detect (Noz diameter Recog)
-----
490789 Nozzle set up
Time-out of reading out the result of Side View Camera detect (Noz diameter Recog)
-----
49078A Nozzle set up
Error in the result of Side View Camera detect (Noz diameter Recog)
-----
49078B Nozzle set up
Failed in getting Noz type Data.
-----
49078C Nozzle set up
Exchanging Noz has not started within predetermined time
-----
EUKYX
3-85199-4100
3.8 Automatic Adjustment
Error ID Error Name, Description, Cause, and Remedy
49078D Nozzle set up
Exchanging Noz has not finished within predetermined time
-----
49078E Nozzle set up
Error in setting Drive Wave of HL-axis
-----
49078F Nozzle set up
Error in setting Drive Wave of NL-axis
-----
490790 Nozzle set up
Error in setting Drive Wave of L-axis
-----
490791 Nozzle set up
Error in coordinate calculation of shifting the Origin
-----
490792 Nozzle set up
Error in setting Sequence Data of HL-axis
-----
490793 Nozzle set up
Error in HL-axis operating
-----
490794 Nozzle set up
Error in L-axis operating
-----
490795 Nozzle set up
Error in the nozzle stocker mark recog. There is a possibility that the stocker type is wrong.
Please confirm that the set stocker in the unit replace screen is the same as the stocker
type of the device. Please clean it up if there is no problem.
490796 Nozzle set up
It is impossible to place a nozzle whose end type is set besides [standard] adjacent to a
head.
-----
490797 Nozzle set up
It stopped by nozzle interference check.
Perform zeroing.
490798 Nozzle set up
Error in communication with recognition.
-----
490799 Nozzle set up
Time-out of communication with recognition.
-----
49079a Nozzle set up
Error in capturing a image with component recognizing camera.
-----