EUKYX-199-4110_G5S2_Instruction_Vol4_E - 第272页
EUKYX 3-107 199-4100 3.10 Others Error ID Error Name, Description, Cause, and Remedy 4b080 1 Sid e View Ca mera o per atio n is ab nor mal. Sid e View Ca mera wa s foun d ab norm alit y wh ile mea sur ing. The re is a po…
EUKYX
3-106199-4100
3.10 Others
Error ID Error Name, Description, Cause, and Remedy
4b031D Feeder Base
Cart rising stopped(Block1).
Cannot release the safety cover for the cart in the opposite side is in process.
The process stopped because there is a possibility that something is placed between Cart
and the safety cover.
-----
4b031E Feeder Base
Cart rising stopped(Block2).
Cannot release the safety cover for the cart in the opposite side is in process.
The process is stopped because there is a possibility that something is placed between
Cart and the safety cover.
-----
4b031F Feeder Base
Failed that Automatic safety cover opening starts up. The process is stopped because there
is a possibility that something is placed between Cart and the safety cover.
-----
4b0320 Feeder Base
Automatic safety cover opening is not completed in predetermined time. The process is
stopped because there is a possibility that something is placed between cart and the safety
cover.
-----
4b0321 Feeder Base
Failed in Automatic safety cover opening (Release Lock).
The process is stopped because there is a possibility that something is placed between cart
and the safety cover.
-----
4b0322 Feeder Base
Cannot distinguish a cart(Block1). Please operate it again.
-----
4b0323 Feeder Base
Cannot distinguish a cart(Block2). Please operate it again.
-----
4b0501 Manual alignment Error
Operation was not completed within predetermined time.
-----
4b050f Manual alignment Error
Error was detected during operation.
-----
4b0701 Connection Error.
Failed in communications with the Control CPU.
-----
4b0702 Connection Error.
Failed in communications with the Recog. CPU.
-----
EUKYX
3-107199-4100
3.10 Others
Error ID Error Name, Description, Cause, and Remedy
4b0801 Side View Camera operation is abnormal.
Side View Camera was found abnormality while measuring.
There is a possibility of Light Emitter and Receiver broken. Please confirm Error from Log
Request Screen(Unit adjustment -> Side view camera Screen)
4b0802 Side View Camera operation error
The measurement by the side view camera was not completed on time.
Communication connector of Side view camera P.C.B is taken off. Please confirm whether
the items of LS-RLS-S(Device Check -> List) is Yellow. HLS communication cable could not
be connected and such like things.
4b0803 Side View Camera operation error
There is a problem in the values measured by the side view camera.
Light Emitter and Receiver could have flaw and soil. Please clean it up. Please press
[Operation] on the screen(Unit adjustment -> Side view camera -> Detection test Screen)
and confirm whether there is an error
4b0804 Side View Camera operation error
There is a problem in the values measured by the side view camera.
There is a possibility of Side View CameraP.C.B. broken
4b0805 Side View Camera operation error
There is a problem in the values measured by the side view camera.
A small light quantity of Light Emitter. Please exchange Light Emitter.
4b0806 Side View Camera operation error
There is a problem in the values measured by the side view camera.
There is a possibility of Side View Camera P.C.B. broken. Either, Please update Version on
the screen(Unit adjustment -> Side view camera -> Correct data read Screen)
4b0807 Side View Camera operation error
There is a problem in the values measured by the side view camera.
Please confirm Error from Log Request Screen(Unit adjustment -> Side view camera
Screen). Either, please confirm whether the items of LS-RLS-S(Device Check -> List) is
Yellow.
HLS communication cable could not be connected and such like things.
4b0808 Side View Camera operation error
There is a problem in the values measured by the side view camera.
Please confirm Error from Log Request Screen(Unit adjustment -> Side view camera
Screen). Either, please confirm whether the items of LS-RLS-S(Device Check -> List) is
Yellow.
HLS communication cable could not be connected and such like things.
4b0809 Side View Camera operation error
There is a problem in the side view camera.(Strobe Signal did not turn off within
predetermined time.)
Please confirm Error from Log Request Screen(Unit adjustment -> Side view camera
Screen). Either, please confirm whether the items of LS-RLS-S(Device Check -> List) is
Yellow.
HLS communication cable could not be connected and such like things.
4b0c01 Nozzle Confirmation Error before pick up comp (Detect After Placement)
Because a component was found on a nozzle, it stopped after disposal.
The result could have some problems.
Please check placement state on placement step recovery screen.
EUKYX
3-108199-4100
3.10 Others
Error ID Error Name, Description, Cause, and Remedy
4b0c02 Nozzle Confirmation Error before pick up comp
The remains component was found on a nozzle during production.
Please confirm whether there is an error in the P.C.B.
4b0c03 Nozzle Confirmation Error before pick up comp (Detect After Discard)
Because a component was found on a nozzle, it stopped after disposal.
Please confirm and clean up the nozzle if this error continues. And please check the status
of a PCB.
4b0e01 Splicing tape set error
The joint part of splicing tape is not correctly set. Please extract a feeder and check
whether the tape has separated from the guide.
-----
4b1201 Press in error / Insertion error
There is an error with the component pressed in or Insertion
Open safety cover and confirm the component on P.C.B. Please remove it or revise it
4b19ff Zeroing of single axis error
Timeout in zeroing of single axis.
-----
4b2001 P.C.B Height Measurement
Abnormal measured value was detected.
Check the measurement position.
4b2002 P.C.B Height Measurement
Abnormality occurred for communication with a sensor
-----
4b2003 P.C.B Height Measurement
The abnormality number of times of measured value was beyond a set point. Running is
stopped.
-----
4b2004 P.C.B Height Measurement
The abnormality number of times of measured value was beyond a set point.
-----
4b2005 P.C.B Height Measurement
A measurement result is abnormal(measure in arbitrary position)
Check the measurement position.
4b2006 P.C.B Height Measurement
Surpass a measurement range. (+ direction)
-----
4b2007 P.C.B Height Measurement
Surpass a measurement range. (- direction)
-----
4b2008 P.C.B Height Measurement
Detected a curve more than permission values. (+ direction)
-----
4b2009 P.C.B Height Measurement
Detected a curve more than permission values. (- direction)
-----