EUKYX-199-4110_G5S2_Instruction_Vol4_E - 第56页

EUKYX 1-7 199-4100 1.2 Preparation for Maintenance (4) Syr ing e Maker: TER UMO Thi s is used to appl y two t ypes of greas es. U se the syringe a nd the no zzle properl y . Two Types of Greases :DAPHNE GREASE MP NO. 1 /…

100%1 / 363
EUKYX
1-6199-4100
1.2 Preparation for Maintenance
Specified lubrication tools
(1) Brush
Use a brush whose bristles do not come off if possible.
Do not use a brush for ball screws and splines.
(2) Vinyl Gloves
Use a pair of vinyl gloves to apply grease or oil by hand.
(3) Hand Grease Gun
Standard
: KH -120
Part No.
: KYB-M382J-00
Maker
: Yamada Corporation
Use DAPHNE GREASE MP NO. 1 and DAPHNE EPONEX GREASE NO. 3. appropriately for
each purpose.
Refer to the attached instruction manuals for the hand grease gun for the usage.
F4A4
• Attachment for Hand Grease Gun KH-120
KYB-M3813-00
Type N
Type H
Type U
Type P
Standard Shape Part No. Remarks
KYB-M382A-00
YHK
YHK
YHK
YHK
KYB-M3829-00
KYB-M3828-00
M5 x 0.5
M5 x 0.5
M5 x 0.5
PT1 / 8
PT1 / 8
It is not attached to the machine. Purchase it separately if necessary.
Note
Reference
Note
Notice
EUKYX
1-7199-4100
1.2 Preparation for Maintenance
(4) Syringe
Maker: TERUMO
This is used to apply two types of greases. Use the syringe and the nozzle properly.
Two Types of Greases :DAPHNE GREASE MP NO. 1 / MOLYNOC GREASE AP1
Appearance
1
2
3
4
5
6
7
8
9
10
mL
12
F4A5
KYB-M380E-00
Nozzle No.49
Syringe
Standard Shape Part No. Remarks
Nozzle No.18
Nozzle No.19
(Color : Brown)
KYB-M382K-00
Maker : TERUMO
10 ml SS-10-LZ
Maker : SAN-EI TECH
Inside Diameter : φ 0.84
Tapered Nozzle #5118TT-B
Maker : NIPRO
Inside Diameter : φ 0.79
Length : 70 mm Flat End
Length : 145 mm
KYB-M382B-00
KYB-M380X-00
1
2
3
4
5
6
7
8
9
10
mL
12
EUKYX
1-8199-4100
1.3 Items for Periodic Maintenance
1.3 Items for Periodic Maintenance
The items (inspection, cleaning, lubrication, etc.) that require periodic maintenance are classified
and described based on each individual devices.
Refer to ”2. Maintenance Check List” in "Chapter 1" for the maintenance based on frequency
of use.
The * -marks represent that the items require maintenance only for the first time.
Follow “Required“ maintenance cycle for the subsequent use.
Device Name
Inspection Cleaning,
and Lubricating Spot
Work
Maintenance Cycle
Daily Weekly Monthly
Every
3 Months
Every
6 Months
Yearly
4.1
Air Source
Main Air Pressure Inspection Required
Air Blowing Pressure Inspection Required
Z Clamp Pressure Inspection Required
Drain Cleaning Required
Filter Cleaning Required
4.2
Vacuum System
Vacuum Pressure Inspection Required
Filter Cleaning Required
4.3
Component
Recognition
Camera Section
Component Recognition
Camera
Cleaning Required
Component Storage Box Cleaning Required
Hanenite Cleaning Required
Fiducial Mark Cleaning Required
QFP Glass Plate Jig Cleaning Required
Teaching Plate Cleaning Required
4.4
Feeder Base
Driving Section
Worm Gear Lubrication Required
4.5
Feeder Cart
Section
Groove on Feeder Base Cleaning Required
Upper Surface of Feeder
Base
Cleaning Required
Reel Box Cleaning Required
Scrap Box Cleaning Required
Upper Surface of
Suppressor
Cleaning Required
Reference
Notice