EUKYX-199-4110_G5S2_Instruction_Vol4_E - 第85页

EUKYX 1-36 199-4100 4.6 Cutter Section 4.6.3 P ar ts replacement of the cutter unit W ARNING Pay special attention to the cutter blade when maintaining. • You may cut your hand or nger with a cutter blade. Make sure to …

100%1 / 363
EUKYX
1-35199-4100
4.6 Cutter Section
(7) Inject approx. 5 cc new grease at grease nipples with a grease gun (3 locations).
(1) Insert the nozzle into the hole on the side to lubricate.
(2) Wipe off the spilled grease.
(DAPHNE EPONEX GREASE No. 1)
Every 3 months / Lubrication
Needle Bearing
Use Type P nozzle.
Type P
M5 × 0.5
Note
Wipe off the old grease with a rag. Apply new grease to
the upper and bottom of the linear guide grease nipples.
Linear Guide Grease Nipple
(DAPHNE EPONEX GREASE No. 1)
Every 3 months / Lubrication
Use Type N nozzle.
Type N
M5 × 0.5
Note
F4A27GH
EUKYX
1-36199-4100
4.6 Cutter Section
4.6.3 Parts replacement of the cutter unit
WARNING
Pay special attention to the cutter blade when maintaining.
•
You may cut your hand or nger with a cutter blade.
Make sure to wear gloves and maintain with caution.
•
Make sure to attach a cutter blade cover when
maintaining a cutter for protection.
Replacing fluorine Sheet
Cycle: 1 year (Required Time : 35 minutes)
(1) Remove the cutter from the main unit.
Refer to “4.6.1 Cutter Unit cleaning” for the procedure.
(2) Remove the slope from the cutter unit.
Refer to “4.6.1 Cutter Unit cleaning” for the procedure.
(3) Remove 5 hex socket head cap screws mounting the fluorine sheet assembly from the cutter
unit.
Hex socket head cap screws
Fluorine sheet assembly
Removed fluorine sheet assembly
F4B23A
Procedure
EUKYX
1-37199-4100
4.6 Cutter Section
(4) Remove 5 hex socket head cap screws from the fluorine sheet assembly
Fluorine sheet
Mounting plate
Take special care for hole
positions of each assembly.
Mounting bracket
Removed fluorine sheet assembly
Hex socket head cap screws
F4B23B
(5) Replace the fluorine sheet.
Assemble the fluorine sheet assemblies and return the cutter unit to the main body.
Make sure to assemble the fluorine sheet assemblies aligning the taps and the hole positions of
each assembly.
Note