EUKYX-199-4110_G5S2_Instruction_Vol4_E - 第95页
EUKYX 1-46 199-4100 4.7 Head Section Multi-F unctional Head Ball Screw (3 locations) No.49 Every 3 Months Lubrication (DAPHNE EPONEX GREASE No. 1) Required T ime: 15 minutes Apply new grease with a syringe. Use No. 49 no…
EUKYX
1-45199-4100
4.7 Head Section
NOTICE
Make sure of the lter folder insertion direction, and
then insert the folder securely to the end.
Make sure that the lter folder upper surface is
aligned with the top block upper surface.
NOTICE
Apply a thin coating of grease (DAPHNE GREASE
MP No. 1) to lter folder O-ring periodically. Lack of
grease may cause O-ring damage or solidication.
Filter Holder
Make sure that the height
of the filter folder is aligned
with that of the top block.
F4A29
EUKYX
1-46199-4100
4.7 Head Section
Multi-Functional Head
Ball Screw (3 locations)
No.49
Every 3 Months Lubrication
(DAPHNE EPONEX GREASE No. 1)
Required Time: 15 minutes
Apply new grease with a syringe.
Use No. 49 nozzle.
Note
Linea Guide (3 locations)
No.49
Every 3 Months Lubrication
(DAPHNE EPONEX GREASE No. 1)
Required Time: 15 minutes
Apply new grease with a syringe.
Use No. 49 nozzle.
Note
Grease should be applied every 3 months after
the initial month.
Notice
Apply grease, taking care that the
grease does not stick to the sensor.
Grease should be applied every 3 months after
the initial month.
F4A30A
EUKYX
1-47199-4100
4.7 Head Section
Pan (3 locations)
Every 3 Months Cleaning
Required Time: 3 minutes
Wipe out old grease in the pan using a rag for
wiping oil.
Note
Vacuum Filter
When replacing the filter,
attach or detach the jig vertically.
Pull down the filter holder with a filter
mounting jig to replace the vacuum filter.
After replacing, insert the filter holder
into the shaft located at the center of the
nozzle holder.
Every 3 Months Change
Filter Holder
Filter Attachment /
Detachment Jig
F4A31A