00196351-06_UM_ACT_DE_EN - 第124页
ACT - Accurac y Check Tool / User Manual 09/2015 Edition 34 Available S - tables: Available X - tables: Availab le tables (se tups) for WP C/MTC:
ACT - Accuracy Check Tool / User Manual 09/2015 Edition
33
If you use the "Adapter 50 mm TWIN" [03085310-01] in the outermost panel you have to extend
the board by 50 mm in SIPLACE Pro Desk!
► For this, enter 390 mm instead of 340 mm for the length in the board description you want to
use (ACT_CC02-05_CPP_TH).
Figure 4-5: Extending the board
4.1.3 Creating a Setup (Assigning Tables)
► Copy an existing setup of your line.
► Replace the tables by using the prepared tables for ACT that you have already imported. (see
section 3.2.5).
Tables are available for each possible machine.
(1)
(2)
(3)
(4)
(5)
Key:
(1) S-tables with setup (4) X-tables with setup
(2) Empty S-tables (5) Empty X-tables
(3) TC = Tray Changer (WPC/MTC)
ACT - Accuracy Check Tool / User Manual 09/2015 Edition
34
Available S-tables:
Available X-tables:
Available tables (setups) for WPC/MTC:
ACT - Accuracy Check Tool / User Manual 09/2015 Edition
35
► Drag the selected table to the required location.
► Use the empty tables to create a setup for ceramic pads, for instance.
NOTICE
If you create a setup with more than one table with ceramic pads, make sure that the
same component is not set-up at more than one location at the same time.
Predefined tables already exist for setting up the tray with the glass components.
NOTICE
● The X- and Y-offsets for the waffle pack trays on the tables have already been
entered! They may need to be corrected!
● The predefined Arbitrary Carrier tray holder should be left on track 21 and the ACT
X-table (Tray)holder should also be physically placed there. Otherwise, it is not
possible to pick-up with all segments (TH) on all machines.
Figure 4-6 displays an example of a setup:
Figure 4-6: Setup on an X4 S with Twin Head at gantry 3. Waffle pack tray with 16x4 glass components (CC02-05) on an
X-table