252301 Issue 2.0 - 第75页

GEM Manual for DEK Printers SECS II Implementation I ssue 2.0 June 9th, 2011 page 75 of 156 S2F35 Link Event Report (LER) S2F36 Link Event Report Acknowledge (LERA) Description: This transaction ena bles the host to link…

100%1 / 156
GEM Manual for DEK Printers SECS II Implementation
Issue 2.0 June 9th, 2011 page 74 of 156
S2F31 Date and Time Set Request (DTS)
S2F32 Date and Time Set Acknowledge (DTA)
Description: Host sends a new date and time to the equipment in order to synchronise
report time stamps.
A. Host Initiated
Host to equipment: S2F31
Structure: <TIME>
Equipment to host: S2F32
Structure: <TIACK>
B. Equipment Initiated - Not applicable.
S2F33 Define Report (DR)
S2F34 Define Report Acknowledge (DRA)
Description: The host can define a group of reports RPTID’s, each with associated
machine variables, for the equipment. Report definitions are held in non-volatile
storage.
A. Host Initiated
Host to equipment: S2F33
Structure: L,2
1. <DATAID>
2. L,a (number of reports)
1. L,2 (report 1)
1. <RPTID
1
>
2. L,b (number of VIDs in report)
1. <VID
1
>
.
.
b. <VIDb>
a. L,2 (report a)
1. <RPTIDa>
2. L,c (number of VIDs in report)
1. <VID
1
>
.
.
b. <VIDc>
Exception: A list of zero length following RPTID indicates the report should be
deleted.
Equipment to host: S2F34
Structure: <DRACK>
B. Equipment Initiated - Not applicable.
GEM Manual for DEK Printers SECS II Implementation
Issue 2.0 June 9th, 2011 page 75 of 156
S2F35 Link Event Report (LER)
S2F36 Link Event Report Acknowledge (LERA)
Description: This transaction enables the host to link reports to a specific event CEID,
such that when the event occurs, the equipment will include the reports in the S6F11
message. Note that the event must be enabled using message S2F37, for the report(s) to
be sent.
A. Host Initiated
Host to equipment: S2F35
Structure: L,2
1. <DATAID>
2. L,a (number of events)
1. L,2 (event 1)
1. <CEID
1
>
2. L,b (number of reports attached)
1. <RPTID
1
>
.
.
b. <RPTIDb>
a. L,2 (event a)
1. <CEID
a
>
2. L,c (number of reports attached)
1. <RPTID
1
>
.
.
c. <RPTIDc>
Exception: A list of zero length following CEID deletes all report links to that
event.
Equipment to host: S2F36
Structure: <LRACK>
B. Equipment Initiated - Not applicable.
GEM Manual for DEK Printers SECS II Implementation
Issue 2.0 June 9th, 2011 page 76 of 156
S2F37 Enable / Disable Event Report (EDER)
S2F38 Enable / Disable Event Report Acknowledge (EERA)
Description: The host uses EDER to enable or disable reporting for a specified group of
events (CEID’s). If any errors are detected in EDER, then no changes will be made i.e.
no partial changes.
A. Host Initiated
Host to equipment: S2F37
Structure: L,2
1. <CEED> enable/disable
2. L,n
1. <CEID1> collection event 1
.
.
n. <CEIDn> collection event n
Exception: If n = 0 then all events are enabled/disabled.
Equipment to host: S2F38
Structure: <ERACK >
B. Equipment Initiated - Not applicable.