SIPLACE DX1DX2-Spec-设备性能参数-EN-DMS - 第20页

20 PCB Conveyor Single Conveyor On the si ngle convey or, PCBs are moved one after the other into the placement machine and place d on a conveyor la ne. Conveyor principle Once the board h as reached the placement area, …

SIPLACE Placement Heads

Nozzle Changers

Technical Data

Nozzle changer for the SIPLACE SpeedStar

Dimensions (length x width x height) 314 mm x 94.5 mm x 68.6 mm

Number of magazines 4

a) All magazines in the nozzle changer must be configured.

Number of nozzle garages 48

Standard configuration 4 magazines with 48 nozzle garages

Nozzle types 10xx, 11xx, 12xx

Compressed air connection 0.45 MPa (4.5 bar)

Nozzle changer for the 12 segment Collect&Place

Dimensions (length x width x height) 314 mm x 94.5 mm x 68.6 mm

Number of magazines 4

Number of nozzle garages 48

Standard configuration 4 magazines with 48 nozzle garages

Nozzle types 3xx

Compressed air connection 0.45 MPa (4.5 bar)

Nozzle changer for the SIPLACE TwinStar

Dimensions (length x width x height) 314 mm x 68 mm x 49 mm

Number of magazines max. 8 magazines for max. 16 nozzle garages

Number of nozzle garages may be freely configured

Standard configuration 3 magazines with two nozzle garages each

1 magazine with one nozzle garage

Nozzle types 4xx with adapter

5xx (standard)

9xx with adapter

Special nozzle, gripper

PCB Conveyor

Single Conveyor

On the single conveyor,

PCBs are moved one after

the other into the placement

machine and placed on a

conveyor lane.

Conveyor principle

Once the board has reached

the placement area, it is gen-

tly braked. As soon as the

board has reached its target

position, the conveyor belt is

stopped and the board is

clamped from below. The

placement process then

starts immediately. Move-

ment and clamping of the

PCBs is monitored.

Position of conveyor

edges

The conveyor can be easily

matched to many different

PCB widths by the automatic

electrical width adjustment.

The fixed conveyor side can

be either right or left in single

conveyors.

Single conveyor

PCB Conveyor

Flexible Dual Conveyor

Flexible dual conveyor

To keep the range of PCBs to

be processed as wide as

possible - whilst maintaining

maximum productivity - the

flexible SIPLACE dual con-

veyor allows you to choose

between single conveyor

mode and dual conveyor

mode. In the dual conveyor,

two boards are moved into

the placement machine and

placed either at the same

time (synchronous mode) or

alternatively (asynchronous

mode). This makes it possi-

ble to process the top and

bottom sides of a board in

one line.

Synchronous mode

In synchronous mode, two

PCBs are moved into the

placement position at the

same time. They are pro-

cessed as a common panel.

When using products with

widely differing placement

contents, common optimiza-

tion of the entire placement

content for both boards can

enhance performance.

Asynchronous mode

In asynchronous mode, only

one PCB is processed per

conveyor lane. At the same

time, another PCB in the sec-

ond conveyor lane is moved

into the placement position.

This saves the full conveying

time of one PCB, thus con-

siderably increasing perfor-

mance, particularly for PCBs

with a short cycle time. The

placement process starts as

soon as one PCB is trans-

ported into the processing

area.

I-Placement

In addition to synchronous

and asynchronous conveyor

mode, a new placement con-

cept has been developed for

the SIPLACE DX: I-Place-

ment. In this mode, the two

heads work simultaneously

and populate a PCB totally

independently of one

another. This further

increases the output.

The background: the place-

ment heads and component

feeder modules of the

SIPLACE DX have acceler-

ated component pickup to

such a degree that it is now

the transport path to the

board and not the pickup pro-

cedure which has become

the speed-restricting factor.

Flexible dual conveyor

Asynchronous placement mode

or I-Placement