Specification SIPLACE CA-Series2014版 - 第49页
49 Technical Data Dimensions and Installation Conditions Length With both extension kits 2380 mm With an exte nsion kit 2103 mm Without extension kits 1826 mm Width of basic machine CA4 incl. monitors, without SWS, witho…
48
Technical Data
Electrical Connection and Interfaces
12
43
PC and LAN
connection
Mains connection for machine
Cable 5 x 6 mm² with CEKON connector 5 x 32
A (3 x 208 V~ / 3 V~ / 230 V~)
or
Cable 5 x 4 mm² with CEKON connector 5 x 16 A
(3 x 380 V~ / 3 x 400 V~ / 3 x 415 V~)
Compressed air connection
SMEMA/Siemens interface
Mains connection per SWS
Cable 5 x 4 mm² with CEKON connector 5 x 16 A (3x 380
V~ / 3x 400 V~ / 3x 415 V~)
49
Technical Data
Dimensions and Installation Conditions
Length
With both extension kits 2380 mm
With an extension kit 2103 mm
Without extension kits 1826 mm
Width of basic machine
CA4 incl. monitors, without SWS, without component
trolley
CA4 with keyboards, without SWS, without component
trolleys
2766 mm
2804 mm
CA4
Width of whole ma-
chine,depending on lo-
cation assignment
Location 3: Component trolley
Location 4: Component trolley
Location 3: Component trolley
Location 4: SWS
Location 3: SWS
Location 4: Component trolley
Location 3: SWS
Location 4: SWS
Location 1: Component
trolley
Location 2: Component
trolley
--- 3330 mm
a
3330 mm
a
3330 mm
a
Location 1: Component
trolley
Location 2: SWS
3330 mm
a
3840 mm 3840 mm 3840 mm
Location 1: SWS
Location 2: Component
trolley
3330 mm
a
3840 mm 3840 mm 3840 mm
Location 1: SWS
Location 2: SWS
3330 mm
a
3840 mm 3840 mm 3840 mm
Height of placement machine
With warning light
With folded-up protective covers
Up to 1863 mm
2060 mm (PCB conveyor height: 900 mm)
2090 mm (PCB conveyor height: 930 mm)
2112 mm (PCB conveyor height: 950 mm)
Placement machine floor clearance
190 mm (PCB conveyor height: 900 mm)
220 mm (PCB conveyor height: 930 mm)
240 mm (PCB conveyor height: 950 mm)
a) This machine has asymmetrical SWS attachments. The center point of the whole machine is therefore not
identical with the center point of the conveyor.
50
Technical Data
Dimensions and Installation Conditions
Weight
CA4 (basic machine)
SWS 12
Changeover table (X)
Changeover table (X),
fully configured with feeder modules
CA4 with 2 SWS 12
CA4 with 4 SWS 12
3,250 kg
350 kg
95 kg
189 kg
3,950 kg
4,650 kg
Floor space required
CA4 6.70 m²
Load per unit area
a
CA4 6.88 kN/m²
Number of machine feet 6
Max. noise emissions 75 dB (A)
Room temperature
Between 15°C and 35°C
Atmospheric humidity
30 to 75 %
(on average not higher than 45%, so that there is no
risk of condensation on the machine.)
a) The load per unit area calculation included an additional working space of 0.5 m on each side of the
machine.