00195406-01_Version Description Setup Center 2.3_ger eng - 第18页

Requirements Supported Hardware Supported machines 18 Software Version Description SIPLACE Setup Center 2.3 4.4.2 Supported machines SIPLACE Setup Center supports the fo llowing placement stations:  SIPLACE 80 F4  SIPL…

100%1 / 82
Requirements
Stations software Supported Hardware
Software Version Description SIPLACE Setup Center 2.3
17
4.3.2 Stations software
SIPLACE Setup Center requires in online mode with forced setup verification the SIPLACE Setup Center
Station Package. This is used for installing the appropriate interface with the stations software:
SMV interface version 1.3 (Mobilink Patch SMV 1.3)
– 407.04 SP2 or higher
– 505.04 or higher
SC Station Interface Version 1.0
– 604.01 or higher
X-Feeder Firmware 01.43
– 604.01 or higher
X-Table Firmware 04.13
– 604.01 or higher
The following station software versions support the unforced setup verification:
408
503
601
602
603
4.3.3 Pre-Setup Unit for X-Tables
The pre-setup unit for X-tables (docking station) requires the following:
Firmware 04.13 or higher
Sontheim PCI CAN Driver Version 3.038 (under 3rd party Installer on the setup CD)
X-Feeder Firmware 01.43 or higher
X-Table Firmware 0.5.04.13 or higher
4.4 Supported Hardware
4.4.1 Supported barcode scanner
SIPLACE Setup Center supports the following barcode readers:
"Symbol MC70" 2D barcode scanner, in connection with the WLAN Client Module, WLAN Access
Point and Belkin USB LAN Adapter.
"Datalogic Dragon M101“ barcode scanner, in connection with the „Dragon OM“ base station
Requirements
Supported Hardware Supported machines
18 Software Version Description SIPLACE Setup Center 2.3
4.4.2 Supported machines
SIPLACE Setup Center supports the following placement stations:
SIPLACE 80 F4
SIPLACE 80 F4-6
SIPLACE F5
SIPLACE F5 HM
SIPLACE 80 S-20
SIPLACE S-23
SIPLACE S-25 HM, SIPLACE S-27 HM
SIPLACE HS-50
SIPLACE HS-50
SIPLACE HS-60
SIPLACE HF
SIPLACE HF/3
SIPLACE X2, X3, X4
SIPLACE D1, D2, D3, D4
SIPLACE CS, CF
NOTE: The programming system SIPLACE Pro and the Setup Center Station Package can restrict this
range of stations.
4.4.3 Supported Feeder Types
Setup Center supports the following feeder types:
WPC
MTC 1 & 2
All Tray Loader
All tape feeder types
All Linear feeders
NOTE: The programming system SIPLACE Pro and the hardware in use can restrict this range of
feeders.
Requirements
Unique Machine IDs Device Recognition
Software Version Description SIPLACE Setup Center 2.3
19
4.5 Device Recognition
4.5.1 Unique Machine IDs
Unique machine IDs are attached to all X-Series machines ex factory.
For other machine series we recommend you order the unique machine IDs before installation and
attach them to each machine (item no.: 0303470-xx).
4.5.2 Unique Table ID
Unique table IDs are attached to all X-Series changeover tables ex factory.
For other machine series we recommend you order the unique table IDs before installation and attach
them to each table (item no.: 03046294-xx).