00195406-01_Version Description Setup Center 2.3_ger eng - 第33页

Existing Restrictions Download Partial S etup Restrictions Software Version Description SIPLACE Setup Center 2.3 33 7 Existing Restrictions 7.1 Restrictions 7.1.1 Download Partial Setup Setup Center 2.3 cannot wo rk wit …

Existing Functions

XML Batch Import Backup/Restore SIPLACE Database

32 Software Version Description SIPLACE Setup Center 2.3

6.18.5 Backup/Restore SIPLACE Database

Purpose

Backup/Restore SIPLACE Database is a tool used to secure and restore the Setup Center and SIPLACE

Pro database, analog to the SIPLACE Pro Database Backup and Restore Tool.

Function

For detailed information please refer to the document Backup and Restore for SIPLACE Software

Systems with MSDE Database, item no. 00193873-xx.

6.19 XML Batch Import

Purpose

The XML Batch Import is the Setup Center interface for the the import of packaging data ofXML files.

Function:

Setup Center monitors configurable directories for XML files which contain packaging unit information.

If such a file is located in this directory the containing packackaging data is automatically imported.

Existing Restrictions

Download Partial Setup Restrictions

Software Version Description SIPLACE Setup Center 2.3

7 Existing Restrictions

7.1 Restrictions

7.1.1 Download Partial Setup

Setup Center 2.3 cannot work with modus Download Partial Setup.

7.1.2 Repair splice

When using splice sensors don't repair damaged packaging unit with splice because repair splice points

cannot be distinguished from the normal splice points.

7.1.3 Online Help

This version does not have an Online Help.

7.1.4 Operating mode

 Mixed use of labels with „unique barcode“ and „Identical Component Lot unit“ is not supported.

7.1.5 Traceability

 The component level indicator for the machines of the S-, F-, HS- and HF-Series recognizes identical

packaging unit information and ignores it. The menu field „Unique ID“ must therefore always be

transferred into a Traceability data field.

 The settings „Identical Component Lot for linear feeders“ and „Identical Component Lot for tray

changers“ record the scanned „Unique ID“ in the data field „Batch“. The Traceability data for the

configured „Unique Id“ and „Batch“ barcodes will therefore both show the „Unique ID“.

 Although Setup Center supports the management of packaging units with splice residues (packaging

unit with 3 tape segments), this leads to incorrect Traceability data for the residual segments. In the

Traceability data, this splice residue is shown as part of the packaging unit last refilled.

7.1.6 Tear down

 The Machines of S-, F-, HS, and HF-Series do not yet support removal of packaging units. During

manual tear down, Setup Center sets packaging unit levels at the machine to zero and expects

threshold control to disable the tracks at the station. It is therefore important to enable threshold

control at the station, otherwise production can be continued in Setup Center, despite manual tear

down having been performed.

7.1.7 Barcode labels

 The barcode fragment ExpiryDate (component expiry date on the packaging unit) is not evaluated

by Setup Center (no notification when time is exceeded).

7.1.8 Setup list

 When SIPLACE Pro 4.1 is used, the setup lists printed out do not contain graphics of the

components.

7.1.9 Splice monitoring

 The splice sensor functionality at the X-feeder requires an upgrade resp. exchange of soft- and

hardware which will be available in 10/2007. Until then this function is deactivated.

Existing Restrictions

Known Facts / Problems (General) Recovery Placement

34 Software Version Description SIPLACE Setup Center 2.3

7.1.10 Recovery Placement

Setup Center 2.3 cannot work with modus Recovery Placement.

7.2 Known Facts / Problems (General)

7.2.1 Setup Verification

 It is a requirement that feeders are not pulled out or switched during setup verification. To put it

differently, as long as setup verification takes place for a single track, the feeder and the

corresponding packaging units must remain in the same location.

 Urgent recommendation: when splicing a reel it must be verified immediatly (refill mode). A danger

exsit when extremely bad pickup rates occur and the CLI has small threshold values then unverified

components maybe placed. If a Splice is detected, the "active" function is available on the station

computer but should not be used. If no Splice sensors are installed the remaining quantity of a tape

running should be checked and corrected before splicing.

 Use of the table check causes active component data to be overwritten at the station. This can reslt

in the lost of trace data if two reels are active on the track.

7.2.2 Quantity management

 Quantity management for tray loaders is not supported.

 If a reel does not have a unique ID barcode, the system can not differentiate between two elements

with identical quantities. If the packaging unit is taken from the feeder, information about the

remaining level is lost or unclear. It is no longer possible to monitor the quantities on the reels. If a

reel which was in this setup is then set up again, the user will need to manually correct the

component level with the help of the Component Level Indicator (CLI).

 Wenn keine Gebindegröße als Barcode definiert ist, wird die Mengenangabe der Bauelemente aus

SIPLACE Pro verwendet. Die Mengeninformationen der Gehäuseform aus SIPLACE Pro werden

ignoriert.

7.2.3 Feeder

 Tray feeders only support one component per level in the towers.

 It is not possible to refill a level in an MTC or WPC. Refilling can only take place by replacing the

whole tray.

 During Online Verification, the tray feeders WPC and MTC1 will only support a limited, forced setup

verification, since levels could otherwise be released by activation at the station.

 The tape feeder 12/16 mm S tape feeder module and 24/32 mm S tape feeder module are only

supported, if the feeder type (e.g. 12mm S) remains the same in all setups used.

 After a foil got torn at an X-feeder the new packaging unit will get activated without any new

verification. This is also the case when forced verification is activated. The activation can be

configured with or without scanning.

7.2.4 Line computer

 The line computer is not supported.