Spec of AX-3 AX-5 June 2005 LR - 第16页
Each placement head has a toolbit exchange unit to exchange nozzles automa- tically in about one second, while production continues. It also ensures maximum flexibility for component range and family setup. Attached to t…
The magnetic connection between nozzle and the placement head allows fast and
automatic exchange of the nozzle while ensuring a firm connection.
Standard nozzles
# nozzles Name Component range
per set
5 L1 01005-0201
5 L2 0201 - 0402
5 L3 0402 - 0603
5 L4 0603 - 0805 - 1206
5 L5 1206 - SO8 -SO16
5 L6 Melf; 1.00mm Ø 2.7mm
5 L7 CON10S1, All SO, SOJ, SSOP, TSSOP, VSO, QFP, TANT and
PLCC package types that comply with the nozzle dimensions.
5 L8 All SO, SOJ, SSOP, TSSOP, VSO, QFP, TANT and PLCC package
types that comply with the nozzle dimensions.
Set of Component Vision nozzles, consist of:
1 V3 Small non-ceramic components (BGA, Flip-chip etc.)
1 V4 Connectors
1 V5 Black, design L8 with extended length
1 V6 Black, design L8 with extra extended length for handling below
NCLA
1 V7 All BGA, SO, SOJ, SSOP, TSSOP, VSO, QFP, TANT and PLCC
package types that comply with nozzle-component size
relationship
Special nozzles
Nozzles made for other package types on request
Automatic nozzle detection and verification
At each program start-up and after each nozzle exchange, the component laser of
the placement head is used to measure and check the right type of nozzle. The
component laser also measures the exact nozzle orientation under the placement
head.
Contents
13 of 34
Each placement head has a toolbit exchange unit to exchange nozzles automa-
tically in about one second, while production continues. It also ensures maximum
flexibility for component range and family setup. Attached to the toolbit exchange
unit is a component dump bin, two toolbit vacuum check pads and a board
alignment camera calibration pad. The vacuum check pad is used for the
auto-matic calibration of the vacuum levels to assure reliable pick and placement
of components. Each toolbit exchange unit has eight different nozzle locations.
Toolbit exchange unit and dump bin
The AX System can be completely operated via a touch screen and a full Graphical
User Interface. The user interface complies to SEMI E95 to maximize ergonomics,
ease of usee amd minimize learning time.
Second user interface
Each AX System is supplied with one user interface at the front-right-hand side. On
the AX-5 a second user interface can be optionally mounted at the front-left-hand
side.
AX-5 machine
2.9 Toolbit
exchange unit
Figure 9
2.10 User interface
Figure 10
Features
14 of 34
Multi language support
For description of error-messages and more comprehensive feedback to the user,
the user interface can be set to different language modes. This can be done while
the production is running and is therefore, suited to multi-lingual environments.
The available languages that can be ordered are (in alphabetical following order):
Traditional Chinese, Simplified Chinese, English, German, Italian, Korean, Russian,
Spanish (Mexican), Swedish, Turkish and Vietnamese. Other languages can be
made available upon request.
Chinese user interfaceFigure 10
Contents
15 of 34