Spectrum Operating Manual - 第210页

S2-9 XX X Se ri es Disp ensi n g Syst em IOM Man ual Specifications 9-2 © 2023 Nordson Corporatio n 9.2 Facility Requiremen ts Table 9-1 Specificatio ns Facilities Re quir ement s – All Models Syst em Footpr int Single s…

9 Specifications

9.1 Overview

The dispensing system facility requirements, specifications, and stability analysis are listed in Table 9-1.

All facility power sources must be safely grounded. These specifications are intended as a convenient

reference for installation, system relocation, planning and operation. Meeting the requirements will ensure

reliable operation and safety of the dispensing system.

WARNING! To ensure optimal performance and safety, it is necessary to install the

dispensing system in a facility that meets the requirements listed in Table 9-1. If

you have any questions, please contact Asymtek Technical Support.

S2-9XXX Series Dispensing System IOM Manual Specifications

9.2 Facility Requirements

Table 9-1 Specifications

Facilities Requirements – All Models

System Footprint

Single station (width x depth):

Two stations (width x depth):

Three stations (width x depth):

600 x 1321 mm (23.6 x 52.0 in.)

850 x 1321 mm (33.5 x 52.0 in.)

1100 x 1321 mm (43.3 x 52.0 in.)

See 9.4 System Dimensions for system drawings.

Clearance Space

Requirement

915 mm

Power (Mains)

Adaptive power supply that accommodates supply voltages between

200-240 VAC, 47-63 Hz single phase.

Short Circuit Current Rating

(SCCR)

5 KA

Facility Circuit Requirement

S2-9XXX w/ 10A Power Supply

S2-9XXP or S2-9XXX w/ 30A Supply

10A

30A

(NEMA L6-30 Outlet Plug Provided)

Amperage (typical

Single lane Dual lane Per Heated Tool Total Amperage

4.6A 5.2A 4.7A

Base system +

heated tooling

Installation

(Over-Voltage Category)

Category II

Air Supply

Two air supplies: one with 3 CFM @ 100 psi for contact tooling, a second one

with 1 CFM @ 100 psi for the rest of the system (100 psi = 689 kPa, 6.8 atm).

Pneumatic Fittings 9084-23-14, 1/4-inch quick disconnect fittings

Air Consumption Application-dependent

House Vacuum (S2-9XXC) ~1 CFM @ 22 inHg max during purge routine

Energy Consumption

~6.0KWh max (with heat)

~0.4KWh max (without heat)

System Noise

<70 dBA, 76 db peak @ 1 M (does not include valve operation noise)

Environmental Conditions

(Operation and Storage)

Shipping: 5-55 °C, 5-90% RH

Operating: 18-28

C, 5-90% RH

Ventilation

Downdraft or updraft

Vent port diameter: 147.6 mm (5.8 in.)

NOTE: Contact the factory regarding impingement heat applications:

100 cfm from the exhaust port may be required.

System Weight

Single station:

Two stations:

Three stations:

377 kg. (31 lbs)

399 kg. (880 lbs)

422 kg. (930 lbs)

Crate Dimensions

1930 x 1321 x 1981 mm (76.0 x 52.0 x 78.0 in.)

Crated Weight

590 kg (1300 lbs)

Standards Compliance

SMEMA, CE, SEMI-S2, SEMI-S8, NFPA 79

10A power manager may use either 120VAC or 240VAC input power supply

S2-9XXX/9XXP system when configured with regular impingement tools: requires one air supply with 9 CFM @ 100 psi for

impingement air and a second air supply with 1 CFM @ 100 psi for the rest of the system. S2-9XXX/900P system when configured

with the high-flow impingement option requires one air supply with 14 CFM @ 100 psi for impingement air and a second air supply

with 1 CFM @ 100 psi for the rest of the system.

Basic weight without options; actual system weight will depend on the specific configuration.

S2-9XXX Series Dispensing System IOM Manual Specifications

9.3 Declaration of Conformity

The machine described below complies with the appropriate basic safety and health requirements of the

listed directives based on its design and type, as delivered by Asymtek. In case of alteration of the

machine, this declaration may lose its validity.

Manufacturer’s Name:

Manufacturer’s Address:

Asymtek

2747 Loker Avenue West

Carlsbad, CA 92010-6603 USA

Authorized Representative in the EU:

“Technical Manager Europe” is authorized to compile technical file.

Authorized Representative Address

in the EU:

Nordson B.V.

Beukelsdijk 2

5753 PA Deurne, Netherlands

Machine/Machine Part Description:

General Industrial Machinery

Type of Equipment:

Automated Dispensing System

Product Series Name:

S2-9XXX Series

Model Number:

Serial Number:

Year of Manufacture:

Applicable EU Directives:

2006/42/EC

Machinery Directive and all applicable amendments

2014/30/ECU

EMC Directive and all applicable amendments.

Applicable Harmonized Standards:

EN 60204-1:2006/AC:2010 Safety of Machinery Electrical Equipment of Machines

Part 1: General Requirements

EN ISO12100:2010 Safety of Machinery General Principles for Design Risk Assessment

and Risk Reduction

EN 61000-6-2:2005/AC:2005

Electromagnetic Compatibility-Immunity for Industrial Environments

EN 61000-6-4:2007/AC:2011 Electromagnetic Compatibility-Emission Standard for Industrial

Environments

I, the undersigned, hereby declare that the equipment specified above conforms to the above Directives

and Standards.

Signature:

Date:

(Name) Vice President, Asymtek

Place of Issue: Carlsbad, CA, USA