7OM-1625-004_w - 第131页
7OM-1603 4-6 Chapter 4 : 1. Outline of Maintenance Unit Name Inspection, Cleaning, and Lubrication Spots Work Cycle of Maintenance Daily Weekly Monthly Every 3 month Every 6 month Y early 3.2.5 T raverse Cart Pallet Rece…
7OM-1603
Chapter 4 : 1. Outline of Maintenance
4-51003-002
1.3 Periodic Maintenance Items
The items (inspection, cleaning, lubrication, etc.) that require periodic
maintenance are classied and described based on each individual devices.
Reference
Refer to "2. Maintenance Check List" for the maintenance based on frequency
of use.
Notice
The * marks represent that the items require maintenance only for the
rsttime.
Followthe○-markedmaintenancecycleforthesubsequentuse.
Unit Name
Inspection, Cleaning,
and Lubrication Spots
Work
Cycle of Maintenance
Daily Weekly Monthly
Every 3
month
Every 6
month
Yearly
3.2.1
Pallet
Pallet Inspection
and
Cleaning
○
Rail Inspection
○
Upper Surface Inspection
○
3.2.2
Elevator Unit
Ball Screw Lubrication
○
Frame Lower Surface Inspection
and
Cleaning
○
Linear Guide Lubrication
○
Belt Inspection
○
Elevator Clamp Rod Inspection
○
3.2.3
Magazine Base
Cylinder Connection
Section
Lubrication
○
Magazine Rail Lubrication
○
3.2.4
Magazine
Rack Shutter Fulcrum
Section
Lubrication
○
T7D4
7OM-1603
4-6
Chapter 4 : 1. Outline of Maintenance
Unit Name
Inspection, Cleaning,
and Lubrication Spots
Work
Cycle of Maintenance
Daily Weekly Monthly
Every 3
month
Every 6
month
Yearly
3.2.5
Traverse Cart
Pallet Receiver Inspection
○
Linear Guide Lubrication
○
Elevator Clamper Lubrication
○
Positioning Pin Lubrication
○
Pallet Chuck Lubrication
○
Groove on Feeder Base Cleaning
○
Upper Surface of Feeder
Base
Cleaning
○
Reel Box Cleaning
○
Scrap Box Cleaning
○
3.2.5.1
Cutter Unit
Cutter Box Inside Cleaning
○
Linear Guide Lubrication
○
Flat Ring
Replacement
○
Fluorine Sheet
Replacement
○
Urethane Clamp
Replacement
○
T7D5
1003-002
7OM-1603
Chapter 4 : 2. Maintenance Check List
4-7
2. Maintenance Check List
The periodic maintenance items (inspection, cleaning, lubrication, etc.) are
classied and described based on how frequently each item should be performed.
Use the tables below as check lists.
Reference
Refer to "3. Maintenance Spots" for the spots to be maintained.
2.1 Daily Maintenance
Object Units
Inspection, Cleaning,
and Lubrication Spots
Work Grease Required Items Check
3.2.5
Traverse Cart
Groove on Feeder Base Cleaning - Vacuum Cleaner, Rag
Upper Surface of Feeder
Base
Cleaning - -
Reel Box Cleaning - Vacuum Cleaner
T7D6
2.2 Weekly Maintenance
Object Units
Inspection, Cleaning,
and Lubrication Spots
Work Grease Required Items Check
3.2.5
Traverse Cart
Groove on Feeder Base Cleaning ----- Vacuum Cleaner
3.2.5.1
Cutter Unit
In Cutter Box Inside Cleaning - Vacuum Cleaner
Flat Ring Cleaning
T7D7
2.3 Monthly Maintenance
Object Units
Inspection, Cleaning,
and Lubrication Spots
Work Grease Required Items Check
3.2.1
Pallet
Pallet Inspection
and
Cleaning
- Rag and Visual
Inspection
T7D8
1007-003