7OM-1625-004_w - 第26页
Safe-15 Safety Precautions 7OM-1603 No. Alert Labels and Description (7) 10-0287 A Be Careful because the machine might down. Description When the elevator unit is to be moved, pay attention the inclination of the oor…
Safe-14
Safety Precautions
7OM-1603
No. Alert Labels and Description
(4)
WARNING
10-0073-
Moving Mechanisms!
Description
Pay attention to the moving mechanisms. Otherwise, you may be trapped by the
moving mechanisms and a serious accident will result.
(5)
WARNING
Keep the door closed during
operation.
Otherwise, part of your body may be trapped
in the moving mechanisms, causing an injury.
Do not keep the door open during operation.
10-0003-
Description
Do not open the door while the multi-layer tray feeder is running. Otherwise, the
magazine will pop out, leading to a serious accident.
(6)
WARNING
Prevent fingers
being pinched.
10-0116-
Description
Pay special caution not to get your ngers trapped. Otherwise, your ngers will get
injured and a serious accident will result.
0908-001
4. Alert Labels
Safe-15
Safety Precautions
7OM-1603
No. Alert Labels and Description
(7)
10-0287A
Be Careful because the
machine might down.
Description
When the elevator unit is to be moved, pay attention the inclination of the oor and
difference in level.
If the oor is inclined 10/1000 mm or more, the elevator might fall down, which
might cause a serious accident.
(8)
Description
Permanent magnets are used in the tape feeding and cover tape take-up sections of
the tape feeder.
Do not allow any person who wears an implanted pacemaker to handle the tape
feeders. Otherwise, the pacemaker may be affected by magnetism, causing a serious
accident.
(9)
10-0264-
Avoid dropping a feeder!
It is heavy and if dropped, an injury will result.
Hold the grip during the work.
Description
Do not drop a feeder. Otherwise, a foot injury will result or the feeder itself may be
damaged.
Carefully handle each cutter one by one and do not drop any.
1102-004
4. Alert Labels
Safe-16
Safety Precautions
7OM-1603
No. Alert Labels and Description
(10)
Description
Do not put your hand in the moving area while the feeder base is moving up or
down.
During the ashing of the feeder ready switch LED, the feeder base is lifted. At that
time, your hand might be caught in the moving section and get injured.
(11)
10-0282-
Pay attention to the moving
mechanisms!
Do not put your hand in the moving area.
Otherwise, your hand might be caught in
the moving area and injured.
Description
Be careful not to get caught.
Otherwise, your hand might be caught in the moving area and injured.
(12)
10-0265-
Be careful with the cutter
blade. Otherwise, your finger
might be cut and injured.
Do not touch the cutter blade.
Only service personnel who has completed
the maintenance training course for the
cutter blade replacement, shall replace
the cutter blade.
Description
Only the service personnel who has completed the maintenance training for the
cutter blade replacement, should change the cutter blades.
Otherwise, an injury on hand might be caused with the cutter blade.
1102-002
4. Alert Labels