YG200_YG200L_Mainte_E - 第11页
vii Before using the machine Risk of injury 23 0 0 1 - G 0 -0 S w W ARNING THE PERSON EXCHANGING THE FEEDERS MUST HA VE BEEN TRAINED TO OPERA TE THE MACHINE CORRECTL Y AND SAFEL Y. HIGH VOL T AGE! Electrical shock hazard…
vi
Before using the machine
Pinch or crush hazard
23001-G0-2J
w
WARNING
NEVER PLACE HANDS IN THE MACHINE DURING OPERATION. HAND OR FINGERS MIGHT BE CAUGHT BETWEEN MOVING
PARTS AND COVERS, CAUSING SERIOUS INJURIES.
Entanglement or cut hazard
WARNING
Gears and cutters can cause
severe personal injury.
Turn power off before
servicing or cleaning.
23001-G0-1M
w
WARNING
DO NOT PUT YOUR HANDS INTO THE MACHINE WHILE THE POWER IS TURNED ON. HAND OR FINGERS MIGHT BE CAUGHT IN
GEARS OR CUT BY CUTTER BLADES, CAUSING INJURIES.
Pinch or crush hazard
23001-G0-1P
w
WARNING
NEVER PLACE HANDS IN THE MACHINE DURING MANUAL OPERATION. HAND OR FINGERS MIGHT BE CAUGHT BETWEEN
MOVING UNITS, CAUSING SERIOUS INJURIES.
Fire hazard
23001-G0-2N
w
WARNING
KEEP AWAY FROM FIRE. SOLVENT MIGHT CATCH FIRE.
vii
Before using the machine
Risk of injury
23001-G0-0S
w
WARNING
THE PERSON EXCHANGING THE FEEDERS MUST HAVE BEEN TRAINED TO OPERATE THE MACHINE CORRECTLY AND SAFELY.
HIGH VOLTAGE!
Electrical shock hazard
23001-G0-1C
c
CAUTION
Use caution since electrical shocks might occur from touching or coming in contact with the power supply section
inside the panel.
HOT!
Possible burns if touched
23001-G0-1D
c
CAUTION
The motor becomes extremely hot during and shortly after operation, so do not touch it!
viii
Before using the machine
LASER BEAM
Do not stare into laser beam!
Max. output:1 mW, Pulse width: 1ms max.
Semiconductor laser (wavelength: 685nm)
Class 2 laser product
LASER BEAM EXIT
Possible loss of eyesight
23001-G0-1E
c
CAUTION
Looking directly into the laser beam may cause loss of eyesight.
DON'T
TOUCH
Do not touch camera unit
DO NOT TOUCH
23001-G0-1F
c
CAUTION
Do not touch the camera unit or apply impacts since this will adversely affect component mounting operation.
Make correct connections
23001-G0-1K
c
CAUTION
Wrong connections or wiring methods other than specified might damage the machine. Always make correct
connections by using specified wiring methods.