YG200_YG200L_Mainte_E - 第12页

viii Before using the machine LASER BEAM Do not stare into laser beam! Max. output:1 mW , Pulse width: 1ms max. Semiconductor laser (wavelength: 685nm) Class 2 laser product LASER BEAM EXIT Possible loss of eyesight 23 0…

100%1 / 87
vii
Before using the machine
Risk of injury
23001-G0-0S
w
WARNING
THE PERSON EXCHANGING THE FEEDERS MUST HAVE BEEN TRAINED TO OPERATE THE MACHINE CORRECTLY AND SAFELY.
HIGH VOLTAGE!
Electrical shock hazard
23001-G0-1C
c
CAUTION
Use caution since electrical shocks might occur from touching or coming in contact with the power supply section
inside the panel.
HOT!
Possible burns if touched
23001-G0-1D
c
CAUTION
The motor becomes extremely hot during and shortly after operation, so do not touch it!
viii
Before using the machine
LASER BEAM
Do not stare into laser beam!
Max. output:1 mW, Pulse width: 1ms max.
Semiconductor laser (wavelength: 685nm)
Class 2 laser product
LASER BEAM EXIT
Possible loss of eyesight
23001-G0-1E
c
CAUTION
Looking directly into the laser beam may cause loss of eyesight.
DON'T
TOUCH
Do not touch camera unit
DO NOT TOUCH
23001-G0-1F
c
CAUTION
Do not touch the camera unit or apply impacts since this will adversely affect component mounting operation.
Make correct connections
23001-G0-1K
c
CAUTION
Wrong connections or wiring methods other than specified might damage the machine. Always make correct
connections by using specified wiring methods.
ix
Before using the machine
Do not use any solvent other than specified
23001-G0-2L
c
CAUTION
Using other than the specified solvents might damage the machine or create a fire hazard.
Pull out the cleaning unit before opening/closing the cover having the following label
23001-G0-3R
c
CAUTION
Before opening or closing the cover affixed with this label, pull out the cleaning unit to avoid possible damage.
Close cover before operating FDD or USB memory drive
23001-G0-0T
c
CAUTION
Before operating the FDD or USB memory drive to copy data, always close the media access cover to prevent dust
from adhering to the FDD or USB port and to protect the floppy disk or USB memory device from electrostatic noise.