MR8740T_user_manual_eng_20191016H.pdf - 第34页
29 Changing the Display Position and Display Magnication of W aveforms 2.4 Changing the Display Position and Display Magnication of W aveforms Y ou can change the display magnication of waveforms by pointing to the ti…
28
Scrolling Through Waveforms
Checking a position of waveforms with the scroll bar
The scroll bar provides the position and size of the displayed part of the waveforms relative to the
entire recording-length waveforms. It also shows the positions of the trigger point and trace cursors.
Scroll bar
Verifying the position of the trigger point and cursors on the scroll bar
Trigger point
Screen display range
Trace cursor A
Recorded range
With the display zoomed in, the scroll bars are displayed at both the top and bottom.
To switch over to another block when [Memory divide] is set to [On]
You can move a block by specifying a block number to be displayed.
Block number
29
Changing the Display Position and Display Magnication of Waveforms
2.4 Changing the Display Position and Display
Magnication of Waveforms
You can change the display magnication of waveforms by pointing to the time axis on the
waveform screen and rotating the wheel button.
Rotating the
wheel button
upward
Zooms in the waveforms.
Rotating the
wheel button
downward
Zooms out the waveforms.
To change the display position of logic channels in a batch
You can move logic channels only after click [Logic] to choose.
When [Logic] is not chosen, you can move analog channels only.
Click the button to select or
deselect it.
2
Operating the Waveform Screen and Analyzing Data
30
Changing the Display Position and Display Magnication of Waveforms
Differentiating the waveform display position and display
magnication of each analog channel
1
Click [Channel position adjustment].
1
The channel position adjustment screen appears.
The blue box area shows the display range of the waveform screen.