00194547-03 - 第39页
Installation Manual Station Software Version 601.02 SP1 Edition 10/2005 39 of 82 4.5.1.6 Base, Extended, Total Memory The type and size of the recognized DRAM memory is indicated here. Base Memory Memory below 1 MB witho…
Installation Manual Station Software Version 601.02 SP1 Edition 10/2005
38 of 82
Sector Number of sectors / cylinders
4.5.1.3 Drive A / Drive B
Drive A: Set the format of floppy drive A: None, 360K, 5.25 in.; 1.2M, 5.25 in.;
720K, 3.5 in.; 1.44M, 3.5 in.;
2.88M, 3.5 in.
Drive B: Set the format of floppy drive B:
None, 360K, 5.25 in.; 1.2M, 5.25 in.;
720K, 3.5 in.; 1.44M, 3.5 in.;
2.88M, 3.5 in.
For drive A: None is set for fail-safe and 1.44M, 3.5in. for optimized default.
For drive B: None applies in both cases
4.5.1.4 Video
Enter the type of graphics adapter in this field. Options are: EGA/VGA, CGA 40, CGA 80, Mono (for
Hercules and MDA). If an adapter has been installed with VGA or a higher resolution, select
EGA/VGA. The default setting is EGA/VGA.
4.5.1.5 Halt On
If this option is activated, BIOS will stop during the start-up process in the event of an error and will
display an error message. If this option is not activated, the BIOS continues without an error
message and uses the default values for processing. If the option is activated, the following causes
of errors can additionally be ruled out:
All Errors
Every error generates an error message.
No Errors No error generates an error message.
All, But
Keyboard
Keyboard errors do not generate an error message.
All, But Diskette Diskette and hard disk errors do not generate an error message.
All, But Disk/Key Diskette, hard disk and keyboard errors do not generate an error message.
All, But Keyboard is selected as the default setting.
Installation Manual Station Software Version 601.02 SP1 Edition 10/2005
39 of 82
4.5.1.6 Base, Extended, Total Memory
The type and size of the recognized DRAM memory is indicated here.
Base Memory
Memory below 1 MB without the adapter hole (usually 640 KB)
Extended Memory Available memory above 1 MB
Total Memory
1
Total memory, sum of all areas
4.5.1.7 Setup page "BIOS Features Setup"
This option comprises configuration entries which enable enhanced performance or customized
setting of the system.
In the "Selection options" column, the setting for fail-safe default is indicated in italics and the setting
for optimized default is underlined
.
1
Note that less memory is indicated here than is installed, as the onboard graphics controller reserves 1 Mbyte of
the main memory for itself
Installation Manual Station Software Version 601.02 SP1 Edition 10/2005
40 of 82
Menu item
Note
Selection options
Virus Warning
If the option is enabled, you will receive a warning if a
program wishes to write to the boot sector or the partition
table of the hard disk.
Enabled
Disabled
CPU Internal Cache
1)
This option allows the internal cache to be enabled or
disabled.
Enabled
Disabled
External Cache
1)
You can enable the external cache here. Enabled
Disabled
CPU L2 Cache ECC
Checking
The ECC checking function of the level 2 cache of the CPU
can be set here.
Enabled
Disabled
Quick Power On Self
Test
This field enables the self-test to be speeded up when you
power on the computer (POST), by dispensing with a
second, third and fourth test of the SDRAM. For each test,
the system is tested once completely.
Enabled
Disabled
First Boot Device
First device from which to boot Floppy; LS120; HDD-0;
SCSI; CDROM; HDD-1;
HDD-2; HDD-3; ZIP100;
USB-FDD; USB-ZIP;
USB-CDROM; USB-
HDD; LAN; Disabled
Second Boot Device
Second device from which to boot Floppy; LS120; HDD-0;
SCSI; CDROM; HDD-1;
HDD-2; HDD-3; ZIP100;
USB-FDD; USB-ZIP;
USB-CDROM; USB-
HDD; LAN; Disabled
Third Boot Device
Third device from which to boot
Floppy; LS120; HDD-0;
CDROM; HDD-1; HDD-
2; HDD-3; ZIP100; USB-
FDD; USB-ZIP; USB-
CDROM; USB-HDD;
LAN; Disabled
Other Boot Device
If none of the set boot devices were found, a search is
made for all possible devices which can be set as a boot
device in one of the three options above, if this entry is set
to Enabled.
Enabled
Disabled
Swap Floppy Drive
If the drive letters assigned to floppy drives are to be
exchanged, this field must be set to Enabled.
Enabled
Disabled
Boot Up Floppy
Seek
If this option is enabled, the BIOS looks for the floppy
drive A once
Enabled
Disabled
Boot Up Numlock
Status
The user can enable the NumLock function here (numbers
on the numeric block on the keyboard) when the system
boots.
On
Off
1)
Enabled caches enhance system performance