00198611-02_IM_712.1_R19-1_EN - 第41页
Station Software Version 7 12.1 (R19-1) / Installation Manual 05/2019 Edition 41 The patch is now ready to be install ed. The following dialog box is displayed. Figure 5- 29 : Ready for installati on Before installing, y…
Station Software Version 712.1 (R19-1) / Installation Manual 05/2019 Edition
40
The Show License dialog box is displayed.
Figure 5-27: Accepting license
► Select I accept the terms of the license agreement to accept the license conditions.
► Click the Next button.
The Packages and Features dialog box is displayed.
Figure 5-28: Selecting packages and features
► Click the Next button.
Station Software Version 712.1 (R19-1) / Installation Manual 05/2019 Edition
41
The patch is now ready to be installed. The following dialog box is displayed.
Figure 5-29: Ready for installation
Before installing, you can check the available, required and recommended disk space (per drive) to
perform the installation. In this case:
► Click the Disk Space button.
Please refer to section 5.4 for more information.
Otherwise:
► Click the Install button to start the installation.
► Exit the setup wizard after successful installation.
► Restart your computer for all changes to take effect.
The installed updates are displayed under Programs and Features in the Control Panel.
Figure 5-30: Installed updates
Station Software Version 712.1 (R19-1) / Installation Manual 05/2019 Edition
42
5.5.1 Deinstalling Product Patches
It is only possible to deinstall the patch that has been most recently installed. Older patches cannot
be deinstalled. Deinstalling the newest patch restores the state exactly before the installation of the
patch.
In previous station software versions, with deinstalling the newest patch, all patches had been
deinstalled and the basic version of the software had been restored.
To deinstall the newest patch, proceed as follows:
► Log in under the ASM_Admin user account on the station computer.
► Open the Control Panel and go to Programs and Features.
► Select Station-SW-7xx Product Patches (RXX-x) from publisher ASM Assembly Systems.
► Click the Uninstall button.
Figure 5-31: Deinstalling newest patch in Programs and Features dialog
After deinstalling the patch, the entry Station-SW-7xx Product Patches (RXX-x) disappears from
Programs and Features, even if older patches are still active. The existence of other patches is
indicated by a higher version number of the entry Station-SW-7xx (RXX-x) compared to the
version number of the basic version shown in the entry Station-SW-7xx Product (RXX-x).
To downgrade to lower station software versions, the complete station software must be
deinstalled.
► Follow the instructions in section 10.1.