00198611-02_IM_712.1_R19-1_EN - 第68页
Station Software Version 7 12.1 (R19-1) / Installation Manual 05/2019 Edition 68 Figure 7-1: Storing calibration data in the EEPROM ► Perform the highlighted function f or each placement head. NOTICE After the storing ca…
Station Software Version 712.1 (R19-1) / Installation Manual 05/2019 Edition
67
7.5 TX-Series (V1 and V2) Placement Machines
► When the TX placement machines are booted for the first time you must select the following
options manually:
– If SIPLACE JTF-ML is used, select the X-Table, multi tray feeder support option for the
JTF-ML Table 40X on Location 1.
– If no reject plate has been installed, you must disable this option explicitly.
7.6 Checking/Updating the Embedded Software
If the correct embedded SW versions are not available on the machine, the machine boot gets
interrupted.
► In this case, perform an embedded SW download.
► Start an overall reference run for the machine.
7.7 Storage Location of the Machine Files (Calibration Data etc.)
The machine-specific configuration, measurement and parameter data is stored in XML files under
C:\Sirio\Work\Individual. These XML files contain all calibration data.
7.8 Storing Calibration Data in the EEPROM
In order to use the fast head exchange feature, the head specific calibration data has to be stored
in the EEPROM. For placement heads with no head specific calibration data stored within the
EEPROM, the available data on the station computer will be stored in the EEPROM of the
respective placement head as follows.
Requirement:
The embedded SW versions have been updated.
Station Software Version 712.1 (R19-1) / Installation Manual 05/2019 Edition
68
Figure 7-1: Storing calibration data in the EEPROM
► Perform the highlighted function for each placement head.
NOTICE
After the storing calibration data step, the message 37200 Changed heads
detected should disappear. Otherwise you must reboot the machine. If the message
still is displayed after rebooting, please inform the ASM Service.
Station Software Version 712.1 (R19-1) / Installation Manual 05/2019 Edition
69
8 Modifying the Installation
The Modify option allows you to change the current installation entries, e.g. machine ID, serial
number and machine type.
8.1 Modifying the Station Software Installation
► Log in under the ASM_Admin user account on the station computer.
► Insert the installation media and mount the *.iso file.
► Open Windows Explorer.
► Double-click the BundleInstaller.exe file to modify the station software.
The Welcome dialog box is displayed.
Figure 8-1: Welcome dialog box
► Select Modify.
► Click the Next button.