00191413-01 - 第368页
12 Production Tools / Station and Line Confi guration User Manual Line Computer UNIX 12.1 Configuration Edit or Software Version 501.xx 01/99 Issue 12 - 6 NOTE The followi ng expla nations a pply if n o comm and is c urr…
User Manual Line Computer UNIX 12 Production Tools / Station and Line Configuration
Software Version 501.xx 01/99 Issue 12.1 Configuration Editor
12 - 5
The main window is subdivided as follows:
- Display area (for description refer to section 12.1.2.1)
- Selection fields (for description refer to section 12.1.2.2)
- Menu bar The menu bar contains the "FILE", "SERVICES", "OPTIONS" and
"HELP" menus.
The "FILE" menu is described insection 12.1.2.3, the "SERVICES" menu
in section 12.1.2.4.
The "°Component changeover table" menu option of the "OPTIONS"
menu is described in section 12.1.2.5.
NOTE
Since the functions and operation of the "OPTIONS" and "HELP" menus are similar to those in other
application programs of the line computer, they are described comprehensively in chapt. 2.
- Command area (for description see section 12.1.2.6)
12.1.2.1 Display Area of Structure Editor
In the display area of the Structure Editor the maximum possible configuration of the machine type is displayed
as a structure.
- Each rectangle within the structure represents a machine option type.
- The machine option types are factory-defined. The original data of a machine option were defined in a
machine option type.
- A given machine option type can be the location for lower-level machine option types. These lower-
level machine option types are connected to the higher-level machine option type by means of lines.
- The topmost machine option type in the display area is the station. It is the location for lower-level
machine option types.
- Upon starting the Structure Editor the rectangle of the topmost machine option type is selected.
If another rectangle is clicked on, the displays in the selection fields change (see section 12.1.2.2).
- By double-clicking on the rectangle of a machine option type, the same becomes a machine option,
which is, however, not part of the machine yet.
12.1.2.2 Selection Fields of Structure Editor
For the machine options of a location to be displayed in the appropriate selection field, the location
(rectangle) must first be selected in the display area by clicking the mouse button.
Selection Fields "Locations", "Mach. options at locat.", "Placeable mach. opt.":
These three selection fields are located in the main window of the Structure Editor (see Fig. 12.1.1) below the
display area. They are used for the selection of machine option s on which actions such as allocating, releasing,
deleting, moving or copying are to be performed (see section 12.1.2.6).
12 Production Tools / Station and Line Configuration User Manual Line Computer UNIX
12.1 Configuration Editor Software Version 501.xx 01/99 Issue
12 - 6
NOTE
The following explanations apply if no command is currently activated in the command area.
- Locations
A machine option has been selected in the display area.
The next higher machine option is considered as the location and is displayed on the listing under
"Locations".
If a different machine option is selected in the display area, the next higher machine option is again
displayed as the location. Always the first entry on the list is selected by default (highlighted in dark).
The list of locations can be empty if no locations exist. This is the case when a new station has been
created for which no station configuration has been created yet.
Each entry in the selection field "Locations" is marked by any one of the three letters "B", "U" or "T".
These letters have the following meaning:
B Machine option is part of the machine
U Machine option is not part of the machine
i.e., the machine option is not (yet) integrated in the structure of the machine.
T Machine option partial structure is not (yet) part of the machine
i.e., the machine option partial structure is not integrated in the structure of the
machine. (A machine option partial structure can be, for example, the head onto
which the centering unit and the PCB centering unit are positioned).
- Machine option at Location
A location (entry) has been selected in the selection field.
All machine options allocated to this location are displayed on the listing "Mach. options at locat.".
If another location is selected, the machine options allocated to this location will be listed.
- Placeable mach. opt.
A location has been selected in the display area.
NOTE
"Placeable machine options" are machine options that are positioned away from the machine thus not
forming part of the machine yet.
A "placeable" machine option is created by double-clicking on the respective rectangle in the display
area. The machine option is then displayed in the selection field "Placeable mach. opt." and can be
manipulated (see section 12.1.2.6).
It is also possible to list machine options in the selection field "Placeable mach. opt." that used to be
part of the machine and which have been released (see section 12.1.2.6).
User Manual Line Computer UNIX 12 Production Tools / Station and Line Configuration
Software Version 501.xx 01/99 Issue 12.1 Configuration Editor
12 - 7
Selection Field "Machine Types":
- Machines
This selection field is located at the upper left of the main window of the Structure Editor (see Fig. 12.1.1).
The machine types are listed here. The first entry is the standard machine (station). The following
entries are the optional station extensions (e.g.Waffle-Pack Changer trolley).
Upon starting the Structure Editor the first entry is selected by default, and the structure of the
standard machine is displayed in the display area (see Fig. 12.1.1).
Example: If the station SIPLACE 80F has been selected upon start-up of the SE, the SIP_80F
will be the standard machine and the station extension Waffle-Pack Changer trolley
WPC-Tr will be displayed in the selection field Machines. If the entry WPC-Tr is clicked
on in the selection field, the display area changes to the structure of the Waffle-Pack
Changer trolley (see Fig. 12.1.2).
Fig. 12.1.2 Structure Editor (Peripheral Station "WPC Trolley")
selection
"Feeder Part"
selection field
"Machines"
display area