00191413-01 - 第421页
User Manual Line Computer UNIX 13 Production Tools / Set-Up Software Version 501.xx 01/99 Issue 13.1 Set-Up Editor (Feeder Part and WPC Editors) 13 - 23 Fig. 13.1. 16 Pick-Up Height: Off set in Z-Direction - Pick- up ang…
13 Production Tools / Set-Up User Manual Line Computer UNIX
13.1 Set-Up Editor (Feeder Part and WPC Editors) Software Version 501.xx 01/99 Issue
13 - 22
-
Divisions in X
Number of divisions in x-direction (default value: 1)
-
Divisions in Y
Number of divisions in y-direction (default value: 1)
-
First div. X [mm]
Offset from the zero point of the waffle-pack tray carrier to the center of the first division in x-direction
(default value: 0.000). See Fig. 13.1.15.
-
First div. Y [mm]
Offset from the zero point of the waffle-pack tray carrier to the center of the first division in y-direction
(default value: 0.000). See Fig. 13.1.15.
Fig. 13.1.15 X-Offset and Y-Offset to the First Division
-
Z [mm]
Pick-up height: Offset in Z-direction from the support surface of the waffle-pack tray in the waffle-pack
tray carrier to the bottom surface of the compartment of the waffle-pack tray (default value: 0.000).
Siehe Fig. 13.1.16.
division of the
waffle-pack tra
y
waffle-pack
tra
y
carrier
first division
X
[
mm
]
zero point of the
waffle-pack tra
y
first division
Y
[
mm
]
center of
first division
waffle-pack tra
y
User Manual Line Computer UNIX 13 Production Tools / Set-Up
Software Version 501.xx 01/99 Issue 13.1 Set-Up Editor (Feeder Part and WPC Editors)
13 - 23
Fig. 13.1.16 Pick-Up Height: Offset in Z-Direction
-
Pick-up ang. [degr]
Pick-up angle (rotational angle) of the component in the tray compartment (division) (default value:
0.00). See Fig. 13.1.17.
Fig. 13.1.17 Pick-Up Angle of the Component in the Compartment of the Waffle-Pack Tray
-
Diagonal X [mm]
Offset from the center of the first compartment (division) to the center of the last compartment in
x-direction (default value: 0.000). See Fig. 13.1.18.
-
Diagonal Y [mm]
Offset from the center of the first compartment to the last compartment in y-direction (default value:
0.000). See Fig. 13.1.18.
pick-up hei
g
ht
Z
(
mm
)
component
pick-up an
g
le
[
de
g
ree
]
compartment of
waffle-pack tra
y
waffle-pack tra
y
waffle-pack
tra
y
carrier
13 Production Tools / Set-Up User Manual Line Computer UNIX
13.1 Set-Up Editor (Feeder Part and WPC Editors) Software Version 501.xx 01/99 Issue
13 - 24
Fig. 13.1.18 Diagonal in X- Direction and Y-Direction
NOTE
If offset values were entered that are not valid for the selected feeder type, the respective editing fields are
surrounded by a red frame. The invalid values must first be corrected before all values can be accepted.
center of last compartment
center of
first compart-
dia
g
onal X
[
mm
]
dia
g
onal
Y
[
mm
]
compartment
of waffle-
pack tra
y
waffle-pack
tra
y
carrier
ment