00191413-01 - 第433页
User Manual Line Computer UNIX 13 Production Tools / Set-Up Software Version 501.xx 01/99 Issue 13.1 Set-Up Editor (Feeder Part and WPC Editors) 13 - 35 ● Click on . ● In the dis play ar ea, clic k on the f eeding unit o…
13 Production Tools / Set-Up User Manual Line Computer UNIX
13.1 Set-Up Editor (Feeder Part and WPC Editors) Software Version 501.xx 01/99 Issue
13 - 34
-
Delete
When this icon is active, the editor is in the deletion mode. All feeding units and components in the
display area can thus be deleted. Prior to the deletion being carried out, a dialog box is displayed
asking you to confirm the deletion.
NOTE
After the deletion operation is completed, another mode should be activated as otherwise feeding
units and components are likely to be inadvertently deleted.
●
Click on .
●
In the display area click on the feeding unit or component you want to delete.
A dialog box is displayed.
●
Click on
OK
if you want the deletion to be carried out, or
Cancel
if you do not want the deletion to
be executed.
NOTE
If a waffle-pack tray carrier is deleted, all waffle-pack trays set up on it are also deleted.
For the selection of levels in the WPC Editor, the following clicking sequence must be observed:
●
first click on the level in the "Levels" display area, then
●
click on the level in the "WPC" display area.
-
Move
When this icon is active, the editor is in the moving mode. All feeding units and components in the dis-
play area can thus be moved.
On a station, the feeding units can be moved within a feeder part, the components can be moved to
different feeders.
In the case of waffle-pack changers, the feeding units and components can be moved between levels.
NOTE
The clicking sequence for moving can be carried out in either direction: either, as described above,
click on the object first and then the target, or click on the target first and then the object.
If an object cannot be moved to the indicated target, a corresponding error message is displayed which
must be acknowledged.
User Manual Line Computer UNIX 13 Production Tools / Set-Up
Software Version 501.xx 01/99 Issue 13.1 Set-Up Editor (Feeder Part and WPC Editors)
13 - 35
●
Click on .
●
In the display area, click on the feeding unit or component you want to move.
●
Click on the new location.
The feeding unit or component is displayed at the new location.
NOTE
For selecting the levels in the WPC Editor, the following clicking sequence must be observed:
●
first click on the level in the "Levels" display area, then
●
click on the level in the "WPC" display area.
13 Production Tools / Set-Up User Manual Line Computer UNIX
13.1 Set-Up Editor (Feeder Part and WPC Editors) Software Version 501.xx 01/99 Issue
13 - 36