00195941-03-UM SiplaceCA-EN - 第213页
User Manual SIPLACE CA 3 Technical Data Edition 08/2011 EN 3.10 Controls on the Placement Machine 213 3.10.3 Ergonomical Arrange ment of the Controls Fig. 3.10 - 1 , page 21 1 gives an overview of how the controls are ar…
3 Technical Data User Manual SIPLACE CA
3.10 Controls on the Placement Machine Edition 08/2011 EN
212
3.10.2 Description
All the controls can be reached by a 1.40 m tall person.
Main switch 3
The main switch is used for switching the power supply to the placement machine on and off.
WARNING
Some parts inside the placement machine will still carry potentially lethal voltages, even when the
machine is switched off at the main switch. 3
Stop button 3
This button stops placement operations at the placement machine.
Start button 3
This button starts the placement machine after it has been switched on or after malfunctions have
been fixed.
EMERGENCY STOP button 3
The EMERGENCY STOP button latches in the ON position when pressed. The power supply to
the gantry axes, the component trolleys, conveyors and used tape cutters is interrupted and the
voltage supplied to the star axes of the placement heads is reduced. Turn the button to release it.
Component counter 3
The component counter displays the number of components processed in increments of ten.
LCD touchscreen 3
Each side of the placement machine features a flat screen monitor with LCD technology and
touchscreen function.
Keyboard 3
The keyboard is located beneath the monitor.
Indicator lamps 3
The sequence of colors of the indicator lamps is white - green. They indicate the operating states
and malfunctions of the placement machine.
User Manual SIPLACE CA 3 Technical Data
Edition 08/2011 EN 3.10 Controls on the Placement Machine
213
3.10.3 Ergonomical Arrangement of the Controls
Fig. 3.10 - 1, page 211 gives an overview of how the controls are arranged. They are subdivided
into the following groups:
Operator panel on the right-hand side (pneumatic unit) of the center console with 3
– LCD touchscreen
– Keyboard with trackball
– Start button, Stop button
Operator panel on the left-hand side (power supply unit) of the center console with 3
– LCD touchscreen
– Keyboard with trackball
– Component counter
– Start button
– Stop button
– Main switch
Input / output side of the PCB conveyor with 3
– EMERGENCY STOP button
– Start button, Stop button
– Button for docking and undocking the component trolley
3 Technical Data User Manual SIPLACE CA
3.10 Controls on the Placement Machine Edition 08/2011 EN
214
3.10.3.1 Controls on the Operating Fields of the Placement Machine
The two operator panel have identical control functions.
Monitor, keyboard, Start and Stop buttons 3
Both sides of the placement machine feature a monitor screen and keyboard.
The Start and Stop buttons are located beneath the keyboard. The on-screen dialog will occasion-
ally prompt you to activate certain actions using buttons, and this arrangement will make it easier
for you both to activate and to interactively control these actions.
Main switch 3
The main power switch is part of the power module. It is located on the left-hand operator panel
viewed in the direction of PCB transport. It is located here because it is only needed for servicing
and preventive maintenance work and is therefore not subject to frequent use.
3.10.3.2 Controls on the Input and Output Sides of the Placement Machine
The controls on the input and output sides of the placement machine are identical.
EMERGENCY STOP buttons, Start and Stop buttons 3
There is an EMERGENCY STOP button and Start and Stop buttons on both the input and output
sides of the PCB conveyor. This arrangement was adopted for the buttons because it enables
them to be reached quickly and easily from any position.