00195941-03-UM SiplaceCA-EN - 第214页
3 Technical Data User Manual SIPLACE CA 3.10 Controls on the Placement Machine Edition 08/2011 EN 214 3.10.3.1 Controls on the Ope rating Fields of the Placemen t Machine The two operator p a nel have identical control f…
User Manual SIPLACE CA 3 Technical Data
Edition 08/2011 EN 3.10 Controls on the Placement Machine
213
3.10.3 Ergonomical Arrangement of the Controls
Fig. 3.10 - 1, page 211 gives an overview of how the controls are arranged. They are subdivided
into the following groups:
Operator panel on the right-hand side (pneumatic unit) of the center console with 3
– LCD touchscreen
– Keyboard with trackball
– Start button, Stop button
Operator panel on the left-hand side (power supply unit) of the center console with 3
– LCD touchscreen
– Keyboard with trackball
– Component counter
– Start button
– Stop button
– Main switch
Input / output side of the PCB conveyor with 3
– EMERGENCY STOP button
– Start button, Stop button
– Button for docking and undocking the component trolley
3 Technical Data User Manual SIPLACE CA
3.10 Controls on the Placement Machine Edition 08/2011 EN
214
3.10.3.1 Controls on the Operating Fields of the Placement Machine
The two operator panel have identical control functions.
Monitor, keyboard, Start and Stop buttons 3
Both sides of the placement machine feature a monitor screen and keyboard.
The Start and Stop buttons are located beneath the keyboard. The on-screen dialog will occasion-
ally prompt you to activate certain actions using buttons, and this arrangement will make it easier
for you both to activate and to interactively control these actions.
Main switch 3
The main power switch is part of the power module. It is located on the left-hand operator panel
viewed in the direction of PCB transport. It is located here because it is only needed for servicing
and preventive maintenance work and is therefore not subject to frequent use.
3.10.3.2 Controls on the Input and Output Sides of the Placement Machine
The controls on the input and output sides of the placement machine are identical.
EMERGENCY STOP buttons, Start and Stop buttons 3
There is an EMERGENCY STOP button and Start and Stop buttons on both the input and output
sides of the PCB conveyor. This arrangement was adopted for the buttons because it enables
them to be reached quickly and easily from any position.
User Manual SIPLACE CA 3 Technical Data
Edition 08/2011 EN 3.11 Controls on the SWS
215
3.11 Controls on the SWS
Each SWS features a monitor screen and keyboard.
The EMERGENCY STOP button is located on one side of the SWS together with the other con-
trols.
3.11.1 Controls and Displays
3
Fig. 3.11 - 1 Controls and displays
(1) Operating status indicator lamp (3) Power supply switch
(2) Emergency STOP switch (4) Monitor screen with keyboard
1
2
3
4