00195941-03-UM SiplaceCA-EN - 第251页
User Manual SIPLACE CA 4 Setting Up and Commissioning Edition 08/2011 EN 4.2 Delivery Configuration and Transportation of Placement Machine 251 4 Fig. 4.2 - 3 Contact surfaces - Forks para llel to the direction of PCB tr…
4 Setting Up and Commissioning User Manual SIPLACE CA
4.2 Delivery Configuration and Transportation of Placement Machine Edition 08/2011 EN
250
4.2.4.3 Fork Lift Attachment Points on the Placement Machine
The next two diagrams show the attachment points of the fork-lift truck forks on the placement ma-
chine, for lifting the machine off the pallet or transporting it without a pallet.
NOTE 4
When transporting the placement machine for longer distances, always use the pallet and fork-lift
truck, to avoid damaging the machine.
Forks parallel to the PCB conveyor 4
WARNING 4
Before lifting the placement machine, observe the following points to avoid causing irreversible
damage to the machine:
– The forks may only be opened to a degree which ensures that they are still within the area of
the machine feet (for attachment points see fig. 4.2 - 3
). The distance between the machine
feet is 776 mm. Make sure you do not increase the distance between the forks so that the
placement machine is lifted under the sides of the machine frame, as this would distort the
machine frame.
When lifting the placement machine, make sure that the forks are loaded evenly. A firm sup-
port surface between the fork and the machine prevents the machine from tipping over when
lifted. This will also prevent a one-sided load on the machine feet, which would deform the
fixing of the machine feet. We recommend that a second person monitors the lifting of the ma-
chine and ensures that the placement machine does not tip over to one side when lifted by
the fork-lift truck.
User Manual SIPLACE CA 4 Setting Up and Commissioning
Edition 08/2011 EN 4.2 Delivery Configuration and Transportation of Placement Machine
251
4
Fig. 4.2 - 3 Contact surfaces - Forks parallel to the direction of PCB transport
(1) Contact surfaces for the forks of the fork-lift
4 Setting Up and Commissioning User Manual SIPLACE CA
4.2 Delivery Configuration and Transportation of Placement Machine Edition 08/2011 EN
252
Forks across the PCB conveyor 4
4
Fig. 4.2 - 4 Contact surfaces - Forks across the direction of PCB transport
(1) Contact surfaces for the forks of the fork-lift