00195941-03-UM SiplaceCA-EN - 第29页

User Manual SIPLACE CA 1 Introduction Edition 08/2011 EN 1.6 Manufacturer/Supplier Warranty/Liability 29 1.6 Manufacturer/Supplier W arranty/Liability We her eby confirm that the content s of this user manual are of a d …

1 Introduction User Manual SIPLACE CA

1.5 Hazard Warnings Edition 08/2011 EN

1.4.3 User Classification

The operating software is structured so that certain functions or menus can only by used or called

by appropriately trained personnel. There are three different classes of user:

– Operator

– Line engineer

– Service engineer

Access to each class may be password-protected. Chapters containing information for user

classes higher than "operator" contain a reference to the user class concerned in the footer.

Operators 1

The operator class consists of any person who has been trained in operation of the machine.

These people are authorized to use any functions associated with operating the machine and may

call up any menus needed to use the machine.

Line engineers 1

Line engineers have undergone special training and are authorized to carry out line engineer ac-

tivities, such as creating setup configurations, determining vision parameters, etc.

Service engineers 1

This class is reserved for technicians of SIPLACE. These are trained to perform service work,

such as the conversion and subsequent configuration of placement machines.

1.5 Hazard Warnings

WARNING 1

– A thorough knowledge of the relevant part of this User Manual is required before carrying out

any work on the machine.

– All work must be carried out by appropriately trained and qualified personnel.

– All warning, caution and danger notes MUST be observed.

– Please also read chapter 2 of this user manual through carefully.

User Manual SIPLACE CA 1 Introduction

Edition 08/2011 EN 1.6 Manufacturer/Supplier Warranty/Liability

1.6 Manufacturer/Supplier Warranty/Liability

We hereby confirm that the contents of this user manual are of a descriptive and explanatory na-

ture only and do not contain any contractual conditions or guaranties. All obligationsof the SI-

PLACE result finally from the relevant contract, on whose basis the here described machine has

been left. This applies in particular to all statements regarding performance or service life and the

agreed liability for faults or defects. The provisions of the contract regarding the liability for faults

or defect are neither extended nor restricted by any statements in this user manual.

1.7 Electromagnetic Compatibility (EMC)

SIPLACE placement machines are designed and tested for professional use in industrial applica-

tions. Electromagnetic compatibility in terms of the emission of interference cannot be guaranteed

in any other environment.

1 Introduction User Manual SIPLACE CA

1.8 EU Declaration of Conformity Edition 08/2011 EN

1.8 EU Declaration of Conformity

The product/device described below 1

Product: Placement machine

Type: SIPLACE CA4

Item no.: 00519780 1

of the manufacturer

ASM GmbH & Co. KG

Rupert-Mayer-Str. 44

D-81379 München 1

conforms to the regulations and standards listed in the EU Declaration of Conformity provided.

1.9 Overview of the Releases

Manual Software version Issue

First issue User Manual

SR.604 CA.xx

Draft 12/2007

Revision User Manual

SR.604.01 CA.xx 05/2009 EN

Revision User Manual

from SR.605.03 SP1 08/2011 EN