00195941-03-UM SiplaceCA-EN - 第356页
5 Tasks on the Mach ine User Manual SIPLACE CA 5.5 Configuring Feeders Edition 08/2011 EN 356 Guide the start of the t ape under the pickup window (item 2 in fig. 5.5 - 5 ) and on, until the tape touches the sprocket w…
User Manual SIPLACE CA 5 Tasks on the Machine
Edition 08/2011 EN 5.5 Configuring Feeders
355
Shorten the component tape with the now exposed component pockets by around 3 cm.
Remove the components from the open tape pockets.
Wrap the cover foil around the front edge of the tape along the bottom of the tape.
5.5.4.3 Inserting the Tape into the X Feeder
5
Fig. 5.5 - 4 Inserting the component tape
(1) Entry of the tape guide channel
(2) Operating panel
(3) Outlet of the tape guide channel
(4) Pickup window
(5) Lever for raising the pickup window
5
Hold the component tape so that the transport holes are on the left-hand side viewed in the
direction of travel.
Insert the tape into the inlet opening (item 1 in fig. 5.5 - 4) of the tape guide channel, until the
tape protrudes from the tape outlet (item 3 in fig. 5.5 - 4
).
Pull the component tape up and out, and fold the cover foil back against the top of the tape.
5 Tasks on the Machine User Manual SIPLACE CA
5.5 Configuring Feeders Edition 08/2011 EN
356
Guide the start of the tape under the pickup window (item 2 in fig. 5.5 - 5) and on, until the
tape touches the sprocket wheel.
5
Fig. 5.5 - 5 Pickup window on the tape feeder module
(1) Tape support, removable
(2) Pickup window
(3) Pull-off edge for the cover foil
(4) pickup area for the components
(5) Lever for raising and latching the pickup window
Press the FORWARDS button on the operator panel (item 1 in fig. 5.5 - 6) until the fold in the
cover foil is in the component pickup area (item 4 in fig. 5.5 - 5
).
User Manual SIPLACE CA 5 Tasks on the Machine
Edition 08/2011 EN 5.5 Configuring Feeders
357
5
Fig. 5.5 - 6 Operator panel of the feeder module
(1) FORWARD button for moving the component tape forward
(2) BACK button for moving the component tape back
(3) FOIL button for tensioning the cover foil
Press the lever (item 5 in fig. 5.5 - 5) forwards, to raise the pickup window (item 2 in fig. 5.5 -
5) into the first engage position.
Pull the cover foil at the side of the pickup window forward and out underneath the pickup
window.
Move the cover foil back, until it is on the pull-off edge (item 3 in fig. 5.5 - 5).
NOTE 5
Do not lower the pickup window until the cover foil is lying against the pull-off edge.
Swing the lever (item 5 in fig. 5.5 - 5) back, to lower the pickup window.
Guide the cover foil over the cover foil rocker (item 2 in fig. 5.5 - 7) until it reaches the foil
packing wheels (item 1 in fig. 5.5 - 7
).