00195941-03-UM SiplaceCA-EN - 第358页

5 Tasks on the Mach ine User Manual SIPLACE CA 5.5 Configuring Feeders Edition 08/2011 EN 358 5 Fig. 5.5 - 7 Guiding the cover foil to the foil packing wheels (1) Cover foil packing wheels (2) Cover foil 5  Press the FO…

User Manual SIPLACE CA 5 Tasks on the Machine

Edition 08/2011 EN 5.5 Configuring Feeders

357

Fig. 5.5 - 6 Operator panel of the feeder module

(1) FORWARD button for moving the component tape forward

(2) BACK button for moving the component tape back

(3) FOIL button for tensioning the cover foil

 Press the lever (item 5 in fig. 5.5 - 5) forwards, to raise the pickup window (item 2 in fig. 5.5 -

5) into the first engage position.

 Pull the cover foil at the side of the pickup window forward and out underneath the pickup

window.

 Move the cover foil back, until it is on the pull-off edge (item 3 in fig. 5.5 - 5).

NOTE 5

Do not lower the pickup window until the cover foil is lying against the pull-off edge.

 Swing the lever (item 5 in fig. 5.5 - 5) back, to lower the pickup window.

 Guide the cover foil over the cover foil rocker (item 2 in fig. 5.5 - 7) until it reaches the foil

packing wheels (item 1 in fig. 5.5 - 7

5 Tasks on the Machine User Manual SIPLACE CA

5.5 Configuring Feeders Edition 08/2011 EN

358

Fig. 5.5 - 7 Guiding the cover foil to the foil packing wheels

(1) Cover foil packing wheels

(2) Cover foil

 Press the FOIL button on the operator panel (item 3 in fig. 5.5 - 6) until the cover foil is ten-

sioned. The cover foil rocker points down and stops the drive motor.

 Cut the component tape flush with the front end of the feeder module.

User Manual SIPLACE CA 5 Tasks on the Machine

Edition 08/2011 EN 5.6 Configuring the X Feeder

359

5.6 Configuring the X Feeder

Setting up the X feeder modules is described in the job guide.

5.7 LCD and Status Display at the X-Feeder Module

The X feeder modules have a multicolor status display (item 6) for signaling the operating statuses

and an LCD display (item 1) to display the texts.

– If the status display lights up green, the feeder module is on standby and is contained in

the current setup. If the feeder module is not contained in the current setup, the status

display remains off.

– If the status display lights up orange, it is signaling a warning. The text of the warning

appears on the LCD display.

– If the status display lights up red, a malfunction has occurred. The error message is out-

put on the LCD display.