00195941-03-UM SiplaceCA-EN - 第41页
User Manual SIPLACE CA 2 Operational Safety Edition 08/2011 EN 2.2 Warning Labels on the Placement Machine 41 2.2 W arning Labels on the Placement Machine 2.2.1 W arning Labels W201 , W203, W204 and W210 on the Placement…
2 Operational Safety User Manual SIPLACE CA
2.1 Safety Instructions Edition 08/2011 EN
40
Only properly trained ASM-technicians are allowed to carry out assembly works and other
tasks during the change of the magnetic track.
For emergency situations, always keep a minimum of two wedges (approx. 10° to 15°) made
of a solid, non- magnetic material (e.g. aluminium) and an unmagnetic hammer (approx. 2 to
3 kg) at hand. These tools will be needed in an emergency to detach parts that are magneti-
cally stuck to the magnet track and possibly to release parts of the body caught between the
two (fingers, hand, foot). Never place the coil assembly of an iron-core motor directly on the
magnet track.
Electronic devices and measuring instruments may be damaged or destroyed by powerful
magnetic fields. Never place any devices with magnetic components in the vicinity of comput-
ers, computer screens or magnetic data carriers (e.g. hard drives, credit cards, audio and
video tapes etc.)
Maintain a distance of at least 45 cm between individual magnet tracks or between a magnet
track and other magnetic surfaces.
2.1.8 Important Notes on Environmentally-Friendly Disposal of Materials
and Components
SIPLACE systems are manufactured using only materials and parts that can be easily separated
and disposed of in an environmentally-friendly way. Hazardous materials are not necessary for the
installation, dismantling or operation of the system.
NOTE 2
The owner of the system has sole responsibility for the proper environmentally-friendly disposal
of machines, working materials, consumables and wear parts.
Please observe your national statutory provisions for waste disposal and environmental pro-
tection.
User Manual SIPLACE CA 2 Operational Safety
Edition 08/2011 EN 2.2 Warning Labels on the Placement Machine
41
2.2 Warning Labels on the Placement Machine
2.2.1 Warning Labels W201, W203, W204 and W210 on the Placement Machine
The warning labels are made from soft PVC film, and are abrasion-proof, light-fast and resistant
to water and weathering. Their design meets the requirements of ISO 3864-2 and ANSI Z535.4.
Fig. 2.2 - 1 Warning labels W201, W203, W204 and W210 on the placement system - part 1
Item W201 [03009338-01]
Item W203 [03009342-01]
Item W204 [03009343-01]
Item W210 [03009350-01]
(T) PCB direction of travel
2 Operational Safety User Manual SIPLACE CA
2.2 Warning Labels on the Placement Machine Edition 08/2011 EN
42
Fig. 2.2 - 2 Warning labels W203, W204 and W210 on the placement system - part 2
Item W203 [03009342-01]
Item W204 [03009343-01]
Item W210 [03009350-01]
(T) PCB direction of travel
WARNING 2
– Do not use abrasive cleaners or solvents for cleaning warning labels.
– Replace any damaged or illegible warning labels.