00195941-03-UM SiplaceCA-EN - 第444页

7 Station Enlargements User Manual SIPLACE CA 7.1 Nozzle Changer Edition 08/2011 EN 444 7.1.3.6 Operation  When you fill a magazine with a certain nozzle type for the first time, attach an adhesive label to identify the…

User Manual SIPLACE CA 7 Station Enlargements

Edition 08/2011 EN 7.1 Nozzle Changer

443

Fig. 7.1 - 15 Magazine and nozzle holders

(1) Position fiducial

(2) Locking plate

(3) Nozzle garage

(4) Hole for cylinder pin to center the magazine

(5) Hole for cylinder pin of the push mechanism

(6) Longhole for cylinder pin to center the magazine

(7) Magazine

7 Station Enlargements User Manual SIPLACE CA

7.1 Nozzle Changer Edition 08/2011 EN

444

7.1.3.6 Operation

 When you fill a magazine with a certain nozzle type for the first time, attach an adhesive label

to identify the type.

NOTE 7

Fill the magazines off the machine and always replace complete magazines. 7

 Open the locking plate and place the nozzles in the nozzle holders.

 Close the locking plate so that the nozzles cannot drop out of the magazines.

CAUTION 7

Magazines may only be filled if all the nozzles on the Collect&Place CA head have been

placed back in their magazines. 7

 Programming the nozzle changer is described in the SIPLACE Pro user manual.

NOTE 7

 Avoid letting components drop onto the magazines. This can cause the locking plate to jam.

 Avoid letting components drop onto the free locations of the feeders. The components could

stick to the magnetic strips. Production may have to be interrupted if the feeder modules are

not placed on the component table correctly. You should therefore regularly clean the maga-

zines and free locations.

User Manual SIPLACE CA 7 Station Enlargements

Edition 08/2011 EN 7.1 Nozzle Changer

445

7.1.3.7 Changing a Magazine

 To remove the magazine, simply push the spring hook (item 1 in fig. 7.1 - 16) away from the

magazine. Lift the magazine out of the carrier.

Fig. 7.1 - 16 Changing a magazine

(1) Spring hook

(2) Retaining clamp

(3) Centering hole

(4) Slot

(A) Push the spring hook away from the magazine