00195941-03-UM SiplaceCA-EN - 第456页
7 Station Enlargements User Manual SIPLACE CA 7.1 Nozzle Changer Edition 08/2011 EN 456 7.1.4.8 Position Detection Every magazine of the nozzle changer has a positioning fiducial for position dete ction. 7 Fig. 7.1 - 25 …
User Manual SIPLACE CA 7 Station Enlargements
Edition 08/2011 EN 7.1 Nozzle Changer
455
7.1.4.7 Changing a Magazine
To remove the magazine, press the spring hook (item 1) away from the magazine and lift the
magazine out of the base.
7
Fig. 7.1 - 24 Changing a magazine
(1) Spring hook
(2) Retaining clamp
(3) Centering hole
(4) Slot
(A) Push the spring hook away from the magazine
NOTE
Make sure that you insert the magazine so that the centering pins slide into the centering hole
(item 3) and slot (item 4). 7
First place the side of the magazine with the centering hole (item 3) and the slot (item 4) on
the base. The two knobs on the magazine must slide into the retaining clamp (item 2).
Push the spring hook away from the magazine.
Press the magazine so that it lies flat on the base, then release the spring hook. The spring
hook must latch into place.
7 Station Enlargements User Manual SIPLACE CA
7.1 Nozzle Changer Edition 08/2011 EN
456
7.1.4.8 Position Detection
Every magazine of the nozzle changer has a positioning fiducial for position detection.
7
Fig. 7.1 - 25 Nozzle changer - Position detection
(1) Position fiducial
(2) Position of the nozzles in the magazine in relation to the position fiducial
User Manual SIPLACE CA 7 Station Enlargements
Edition 08/2011 EN 7.1 Nozzle Changer
457
7.1.4.9 Nozzle Changer "Row 2" for the 6 Segment Collect&Place CA Head
[00119664-xx] Nozzle changer 2 HF/X/CA/D3, 6 segment Collect&Place head
The "row 2" nozzle changer may be installed at the following locations:
CA4 machine: locations 1, 2, 3 and 4 (see fig. 7.1 - 20
, page 449)
CA3 machine: Locations 1, , 3 and 4 (see fig. 7.1 - 21
, page 450)
The retrofit package contains apart from the the nozzle changer an assembly kit.
7
Fig. 7.1 - 26 Assembly kit for the nozzle changer "Row 2"
(1) Assembly kit for the nozzle changer "Row 2"